question about pag-taod sa processor and heatsink fan.

[whoopz]

---

Good day peeps
I assembled a new pc amd x2 4000+ brisbane with asrock nf7g-720p. Wala man ni andar at first and I thought ang processor dili maayo pagkataod coz first time nako taod processor. Unya ako gi-remove and reinstall ang heatsink fan about 3 times to make sure. Ending ang reason nga dili muandar is ang memory diay and not the processor.

Ok raba ang new processor heatsink fan three times gi-reinstall? I mean ok ra nako pagka taod pero dili raba mawala ang cooling effect sa iya thermal paste ani?

hope you could give your inputs. thanks.

[spookey]

ok ra man siguro bro kay wa pa man nakacure ang paste. it usually takes 2-3 days for the paste to finally set-in...

[whoopz]

hay salamat. ok radiay na bro. hehehe.... cge nako gi check yesterday ky dili pako confident coz first time paman gud gataod ug proc.

nakuyawan pudko ky pag check nako sa temp 41degrees celcius idle man ang proc temp.coz i was expecting 35degrees celcius idle from an amd x2 brisbane.

normal raba na?

[whoopz]

nasayop diay ko sa mga una nako post. i said windsor pero brisbane ako pasabot, the one which is 65watts.. but i edited it already.

and about the temps, ok na, it idles at 36 na. :mrgreen:

[deford_cnca]

Bro, okay rana even how many times pana nimo e remove/install basta bantay lang ng dili ma bend or break ang pins sa processor.

[IT]

hay salamat. ok radiay na bro. hehehe.... cge nako gi check yesterday ky dili pako confident coz first time paman gud gataod ug proc.

nakuyawan pudko ky pag check nako sa temp 41degrees celcius idle man ang proc temp.coz i was expecting 35degrees celcius idle from an amd x2 brisbane.

normal raba na?

NEXT TIME READ THE MANUAL 1st BEFORE YOU INSTALLED... OR ELSE... BYEBYE.

[fish]

hay salamat. ok radiay na bro. hehehe.... cge nako gi check yesterday ky dili pako confident coz first time paman gud gataod ug proc.

nakuyawan pudko ky pag check nako sa temp 41degrees celcius idle man ang proc temp.coz i was expecting 35degrees celcius idle from an amd x2 brisbane.

normal raba na?

there could be bubbles formed sa imong pag tangtang and taod ug balik sa imong hsf. nindot unta to kung gi-porma nimo ug balik ang thermal paste...

[headset]

so kung ma deform ang thermal paste sa 1st nga pag taod then I balik ug install, pwede ra i-porma balik?
using what? an unused Credit card perhaps?

[fish]

so kung ma deform ang thermal paste sa 1st nga pag taod then I balik ug install, pwede ra i-porma balik?
using what? an unused Credit card perhaps?

yup credit card nga expire will do... or kanang prepaid load card.

[spookey]

pwede ra pud dili pa expired na Credit Card... hehehehe...