333mhz ra ang ma detect

[regilb]

---

Kinsay naka suway nag gamit ani nga CPU? Unsay motherboard inyo gigamit? I bought an ASUS P5P800S motherboard for this CPU and PC400 DDR ram, ang problema bsan 400mhz ang ram, 333mhz ra ang ma detect niya... Ako na gipa pulihan ang memory, mao man jud gihapon. Any thoughts?

[Visual C#]

Have you checked the settings in the BIOS? Maybe it was set to that speed. Double check to be sure.

[abloyboat]

giunsa nimo pagkahibalo nga 333MHz ang na detect not 400MHz?

[AMD_infinium05]

whats your Processor?... RAM bus speed cant exceed to cpu's FSB

[regilb]

processor nako is 2.66 Ghz mobo is socket 775, dli kaha ni sa CPU? or sa mother board. mkasuway mo ani nga problem?

[t3ChNo™]

try lng flash sa BIOS

[King]

All i know that most of brand new motherboard support automatic detection sa imo ram speed. if your cpu FSB support 400 Mhz its ok for your RAM. Try changing the bios setup for memory latency. if it doesn't solve the problem contact me: 09104418538.

[AMD_infinium05]

if His FSB is higher than or equal to 400.. it shud work

[shejulfa]

pre.... kung ang imong board mo support lang ug 333 mhz kutob ra gyud na siya dha bisag imo pa nang buta-ngan ug pila ka PC400 o PC533... PC333 ra gyud na iyang mabasa mao dili magamit ang iyang complete capacity. Kung gusto gyud ka na mo detect gyud na ug PC400... try overclocking pero dili ko mo recommend ini kay it will shorten the life sa imong MOBO.... kung as long as running fine lang imong systems okey lang na oi.... Hope naka tabang ko pre... if you need any consultation from software to hardware configuration just pm meh....

[regilb]

sa board gyud cguro ni bro..nga mao ra gyud iyang ma detect, akong gi overclock ug 10% ok rani cya? unsay maayo ani? or i default lang...