Again another phone from our very own Cherry Mobile, introducing the Omega 2/HD.
Update: kinsa kabalo thai diha aron kasabot sa mga gepangtabi aning tawhana ahahaha
noticeable lag but playable.
Cherry Mobile Omega HD specs:
5″ HD (1280×720) IPS capacitive touchscreen
Dragon Trail Glass Technology
1GHz dual-core processor
1GB of RAM
4GB internal storage
microSD up to 32GB
12MP BSI camera with LED flash
720p video recording
2MP BSI front-facing
WiFi b/g/n
3G
Bluetooth
GPS
2,100 mAh battery
Android 4.1.1 Jellybean
Black & white variants
The Cherry Mobile Omega HD has an SRP of Php7,999
thanks for CM for giving the masses a chance to have a experience of a phone comparable to known branded in terms of specs and performance.
user review:
I-Mobile Iq6 Evaluation After 2 Days Of Use. - Mobile internet and devices - Thailand Forum
------------------------------------------END--------------------------------------------------------
Rooting Instruction by Ish Guidote
Disclaimer: I will not be liable for bricked devices. Follow these instructions at your own risk. ROOTING VOIDS WARRANTY, as per Cherry Mobile. Please be guided accordingly.
This tutorial is not recommended for newbies. Knowledge of basic adb and fastboot commands is helpful. Better if you have previously installed ADB drivers.
Downloads (
My Files
SuperSU zip
TWRP ported by me
SP Flash Tool
MTK Drivers
MTK 6577 scatter file
Place the scatter file and TWRP recovery in the SAME FOLDER.
1. While the phone is still on, enable USB debugging (Settings > Developer options) then plug into PC. Allow drivers to install. Install the MTK drivers as well.
2. Mount phone as USB storage. Copy SuperSU zip to internal or external SD card. Unmount USB storage, then unplug phone from PC.
2. Turn off phone. Remove the battery.
3. Start SP Flash Tool. Under "Scatter-loading," choose the MT6577_Android_scatter_emmc.txt. You will see that RECOVERY has a check beside it. Click on "Download." A warning will appear, proceed anyway.
4. With your phone still off and the battery out, plug it in to the PC. Flashing should start. It will only take a few seconds. You'll see a green circle when it's done.
5. Unplug USB cable and put the battery back.
6. Enter recovery mode by Power and Volume + button. Release both buttons when you see the boot menu. Use Volume + to highlight "recovery." Then use Volume - to confirm.
7. Click "Install." Choose the appropriate tab (internal or external SD card).
8. Select UPDATE-SuperSU-1.25 zip. Swipe to confirm the update. It will flash. Go back to main menu of TWRP.
9. Click "Reboot system." Wait until you are fully booted into your homesceen.
10. Once booted, you should see SuperSU in your app drawer.
Cherry Mobile Omega HD (cherry did it again)
Originally Posted by madmike
Reply With Quote
Posting Permissions
