2.4G Wifi Signal Repeater/ Booster/ Amplifier
Output power 1W/ 30dBm
Light and portable
One year warranty
Features:Fits on routers with TNC & SMA connectorCast Aluminum ConstructionPower and transmit LEDs15dB transmit gain (adjustable)Lightning ProtectionHigh Gain, High Value, High PerformanceIncrease range of low powered radio modems AntennaSpecifications:5dBi Antenna w/RP-SMA male Connector145% Performance150% DistanceAntenna length: 191mmConnector: RP-SMA male Booster Specifications:
Operation Range |
2400-2500 MHz |
Operating Mode |
Bi-directional, half-duplex, Auto-Switching via carrier sensing |
Transmit Gain (Auto) |
15dB (Adjustable) |
Output Power |
1W/30dBm nominal for 802.11g/54Mbps |
Frequency Response |
*+- 1dB over operation range |
Transmit Input Power |
Max. 100mW, Min 6mW |
Receiver Gain |
15dB typical |
Receive Noise Figure |
3.5dB typical |
Connectors |
SMA receptacle (SMA F) and TNC receptacle (RP-TNC F)
(50 ohm) |
Power |
6V DV Max. current |
Operating Temp. |
*-20 to + 70C |
Operating Humidity |
Up to 95% relative humidity |
Distance* |
Up to 2000M (6600ft) depends on environment |
Dimension (cm) |
7.8 cm (L) x 5.6 cm (W) x 2.9 cm (H) |
Material |
Die Casting Aluminum |
Safety Certification |
FCC/CE/VCCI |
Package Content:1W Booster/AmplifierAC adapter (110~240V input)RG316 Cable (30cm) (Connector: RP-SMA Male to SMA Male)SMA to TNC Adapter (SMA-Male to TNC-Female)5dBi AntennaManualWarranty: 1 year
Package contents:
- Indoor Wireless Amplifier Unit
- 30cm RG316 cable
- Quick Installation Guide
- Power Supply
- 5dBi Antenna
Installation procedures:

Please follow the steps 1~4 to install the device. When disconnect, please unplug the power adapter first.