How to Reset d Broadband Wireless Router?

[JRanes]

---

elow..anyperson there have an idea to reset d wireless broadband? my problem is..i cannot get inside d routers setup! mybe d address was change after i connect it from d laptop..now d router cannot be dtected anymore.. any help plz...?!

[dexfranco]

what model is your router, different routers use different procedures :mrgreen:

[JRanes]

Model No. : WRT54G

[JRanes]

Now i try d CD den when i install...it ask me a password. Do u knw wats d default pass 4 ds? we olride press d reset button cguro ng reset na rin ung password.

[gtjr_ph]

By default the ip address should be set to 192.168.1.1.

By default the username is blank, and the password is admin.

refer to this link,
http://www.portforward.com/english/r...rcraft_III.htm

[francis211]

ako kahibalo ko txt me 09197793930

[coolnezz]

why would the address change? maybe someone doesn't want you to access it?

[dexfranco]

How to Reset the Linksys WRT54G Wireless Router

You may need to do this if you forget your router’s password or made a mistake and you can’t connect to the router. In this post I’ll outline two methods you can follow to reset your Linksys WRT54G wirless router.

Note:
Reseting the router to the factory defaults will delete any changes you have made to the router, including any security settings. This should be used as a last resort.

Reset Button

The first method involves simply pressing a button located on the back of the router. The image below (courtesy of Linksys) shows where the button is located.

To reset your router, use the following steps:

1. Press the reset button for 30 seconds.The settings should now be returned to the factory default settings, meaning any changes you had made would be deleted.
2. Open up your Web browser and enter 192.168.1.1 in the address bar.
3. For the login, leave a blank ID and enter admin as the password.

The router has now been reset. Follow the steps in Securing Linksys WRT54G Wireless Router to secure your router.


Through the Web Administration Pages

The second method involves logging into the Web administration pages of the router. Use the following steps to reset the router using this method:

1. Open your Web browser and enter the IP address of your router. By default, the address is 192.168.1.1.
2. Enter your user ID And password when prompted. Hopefully this has been changed, but if it hasn’t, the default is no ID and admin as the password.
3. At the top of the Web page, click Administration and then Factory Defaults.
4. Beside Restore Factory Defaults, click Yes.
5. Now click the Save Settings button at the bottom of the Web page.

Your WRT54G wireless router should now be reset to the factory defaults. Ensure you follow the steps outline in Securing Linksys WRT54G Wireless Router to secure your router.

Enjoy !!!

[lynnkin_park85]

disconnect all connections then try pressing the reset button for about 15 to 30 sec after that dpat nkaset na dayon xa to its original settings.