Pentium4 2.0 to Pentium4 2.8 Processor. Is this OK?

[luigie2x]

---

Hi, I would just like to ask you if this is possible? I will change my P4 2.0 into P4 2.8.
Board socket is 478.

Then is it alright if I'll increase the Memory from its current 512MB into 1Gg. (DDR1 ni sya)

Thank you in advance Master! (I respect you all)

God bless you!

[bayawanon]

yes it should be ok. as long as your mobo supports it

[luigie2x]

My mobo is Intel 845PE-w83637. Maka support ra ba? and how know if it can support it or not?

[siopao1984]

simple bro, just go to the intel website. search for that motherboard model then check the manual > go to cpu compatibility list
it should list all the supported cpu's

also go to memory compatibility list
it should list all the supported memory for that mobo

[luigie2x]

simple bro, just go to the intel website. search for that motherboard model then check the manual > go to cpu compatibility list
it should list all the supported cpu's

also go to memory compatibility list
it should list all the supported memory for that mobo

Thank you , it is very helpful!

[bim27142]

basta same socket ra na nga P4 2.8 bro unya same DDR1, paslak nalang drtso then you'll know it

kidding aside, i think it should be OK... again, you can confirm from Intel's website... look for the exact model of your motherboard then you can check it from there...

[misterbot]

Intel D845PESV/D845PECE ako gitry ug search kani akong nakit an.. try daw ni check. kompleto ang prod. info.

[luigie2x]

Dili man nako maopen ang BIOS setting sa ako pc when im booting , cge ko press f2 pero mobypass man gud mao nga dili nako macheck ang exact na model

[kidlovejeayanne]

suwayi daw F8 ang e press bro..

[3kster]

download nlng ug CPU-z or pc wizard aron ma bal.an nmong exact model