Need Ur Xpertise Guys.....

[metallica]

---

ingun ani ang situation, bout over a 100 hundred meters ang pikas bldg, wired cable ang gigamit aron mka hatag ko ug internet conections, pero wla signal nga mo dawat sa pikas switch nga ako gibutang did2, ok rman ang cable conection, new ang switch.

ang akong pangotana, kung beyond 100 meters ang imo cable dili na d ay ka pick-up ug signal from the other switches or ur source?

tnx for ur rplies

[r0mm3L]

repeater

[carlou]

The segment length for a 100BASE-T cable is limited to 100 meters (as with 10BASE-T and gigabit Ethernet). All are or were standards under IEEE 802.3. So kung sobra sa 100, meaning dili mugana!

[Rance]

You need a repeater if greater than 100 meters UTP (RJ-45) connection.. you can try to use coaxial cable I think it will go beyond that.

[djereza]

metallica: they're right. =) dili pwede over 100 meters unless naa kay repeater. or coax, fiber imong gamiton.

[Redman]

after mga 80 mtrs bro put a switch then connec na sd sa cable to ur other side sa bldg.

[airosus]

bro metallica,

bump ko ana ila tanan advice,..tumpak! :mrgreen:

[metallica]

tnx sa inyo mga info mga bro, god bless

[ikee]

The segment length for a 100BASE-T cable is limited to 100 meters (as with 10BASE-T and gigabit Ethernet). All are or were standards under IEEE 802.3. So kung sobra sa 100, meaning dili mugana!

thats true!!>..it will loose its signal..best advise is a repeater bro..

[DEStRucto]

:mrgreen: awryt!! 100% ryt ayt.. repeater