Results 1 to 5 of 5
  1. #1

    Default QUESTION about RAM


    mobo: asus p5kpl-am se

    1. I am using ddr2 800 right now, so dapat ddr2 800 japon akoa paliton right?? or pde nko sagulan ug lain?

    2. If sagulan ug ddr2 667, dli ni makadaot?

    3. Unsay difference anang 667 vs 800?

    4. Difference between ddr2 or ddr3? Mas nindot ni ang ddr3 noh?

    I hope you can help me and explain it to me in simpler terms
    Last edited by archspace; 08-29-2010 at 09:18 PM.

  2. #2
    Ans.

    (Assuming AMD imo set-up)

    1.Dili pwede sagulon ang 800FSB ug 667 FSB
    2. Dili siya makadaut pero dili mo booth imo system... blue screen ang labas
    3. And difference kay ang ang clock speed ug consequently iya maximum theoretical transfer rate:


    Memory Real Clock Maximum Theoretical Transfer rate
    DDR2 667 333MHz 5,333MB/s
    DDR2 800 400MHz 6,400MB/s

    4.Yes mas nindot ang ddr3 interface kay mas higher ang iya theoretical transfer rate ug frequency.. it will also consume less power kay 1.5V ra ang volatage consumption sa mga ddr3 conpared to ddr2 na 1.8 at stock voltage.

    Bro for more info about ddr, ddr2 and ddr3 kindly refer to this article: Everything You Need To Know About DDR, DDR2 and DDR3 Memories | Hardware Secrets

    For the print version of the above article: Everything You Need To Know About DDR, DDR2 and DDR3 Memories | Hardware Secrets

    Hope this helps

  3. #3
    1. pwede pero if naka auto imo setting sa bios, ma-overclock imo DDR2-667(assuming kana nga ram imo idungang ). If li ka ganahan mo overclock niya ddr2-667 imo idugang pananglitan, pwede nimo i-downlock imo already existing nga ddr2-800. Manual config ra na nimo sa BIOS.

    2. li man, pero naa'y instances nga pilian ang mobo, but most likely it should run fine, if dili just follow my first answer.

    3. Speed and latency, depende ra sa manufacturer. Li tanan DDR2-667 pareha. But in terms of performance walay kalahian makita ra nimo ang difference on ram specific benchmarks

    4. Siyempre, mas taas ang speed niya. Not quite sure though if ma compensate ra sa mem. speed ang taas nga latency sa DDR3 vs DDR2. But in general go for DDR3 if your motherboard supports it.

  4. #4
    Lahi2x man inyo tubag sa first question oi...Libug na noon.

  5. #5
    both answers are theoretically correct

    naay mobo's na dili mag accept sagol na 667 and 800 mhz
    and naay other mobo's na mag accept sagol na memory

  6.    Advertisement

Similar Threads

 
  1. question about RAM po..
    By saDz in forum Computer Hardware
    Replies: 7
    Last Post: 05-12-2011, 02:39 PM
  2. question about RAM(kingston and nanya) sa PCX
    By emaypunk in forum Computer Hardware
    Replies: 22
    Last Post: 06-11-2010, 06:54 AM
  3. question about RAM?
    By piddot in forum Computer Hardware
    Replies: 10
    Last Post: 11-08-2008, 10:24 AM
  4. QUESTION ABOUT RAM
    By boyq in forum Computer Hardware
    Replies: 5
    Last Post: 04-02-2008, 07:00 PM
  5. question about RAM
    By v2s13 in forum Computer Hardware
    Replies: 10
    Last Post: 05-04-2007, 09:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top