P0w3rM0v3's Watercooling Bleed Problem

[P0w3rM0v3]

---

@jojobanana92400 tinuod nindot imo rig br0. ka ingon ka na enthusiast jud! idol nag assemble sad ko sa ako bago rig ron bah nya first time nako nag watercooling, nya karon nag pr0blema ko og prime sa ako pump... dli nako ma kuha tanan hangin sa ako loop. naa ka ma advise? gi pindutan man ko sa ako migo na daghan daw mga hinabangon na mga taw dro. mo post nya ko dri inig human sa ako rig.

para lang naa ka idea sa ako loop:

pump+resi > rad > cpu > chipset > gpu > back to the pump+resi

ako problem is on the hose leading to teh radiator from the pump+resi, when I turn off my pump a huge gap of nothing but air comes out from the raditor. so there is 3 inches of tubing starting from the radiator inlet fitting with nothing but air in it.

best wishes ninyo mga idols.
pm

[poldopunk]

^ unsa imohang WC kit, bai?

[andz]

@jojobanana, idola jd sa rig oi! pina ka nindot sa cebu i will post my rig here someday, pag completo!

@jojobanana92400 tinuod nindot imo rig br0. ka ingon ka na enthusiast jud! idol nag assemble sad ko sa ako bago rig ron bah nya first time nako nag watercooling, nya karon nag pr0blema ko og prime sa ako pump... dli nako ma kuha tanan hangin sa ako loop. naa ka ma advise? gi pindutan man ko sa ako migo na daghan daw mga hinabangon na mga taw dro. mo post nya ko dri inig human sa ako rig.

para lang naa ka idea sa ako loop:

pump+resi > rad > cpu > chipset > gpu > back to the pump+resi

ako problem is on the hose leading to teh radiator from the pump+resi, when I turn off my pump a huge gap of nothing but air comes out from the raditor. so there is 3 inches of tubing starting from the radiator inlet fitting with nothing but air in it.

best wishes ninyo mga idols.
pm

You need to bleed your system, what watercooling parts do you have?

sorry for OT

[P0w3rM0v3]

OT:

koolance rp-980 > swiftech mcr 320-qp > swiftech apogee XT > gigabyte ga-x58a-ud7 (naa cya built in chipset waterblock) > dangerden 5970 waterblock > back to teh koolance rp-980 pump+resi

to be more specific

@adz wut do you mean by bleed? and how to do?

[andz]

OT:

koolance rp-980 > swiftech mcr 320-qp > swiftech apogee XT > gigabyte ga-x58a-ud7 (naa cya built in chipset waterblock) > dangerden 5970 waterblock > back to teh koolance rp-980 pump+resi

to be more specific

@adz wut do you mean by bleed? and how to do?

very nice system and wc parts, read this: The correct way to bleed a watercooling loop? - Overclock.net - Overclocking.net

Sorry again for OT, very nice rigs here!

[centax error]

pump+resi > rad > cpu > chipset > gpu > back to the pump+res

try daw ni : pump > cpu > chipset > gpu > rad > res > pump

btw, nindot na i dual loop imong setup

[jojobanana92400]

@Pow, Yup nindot na imung setup. as what andz said. and try sa g ingon ni Centax error. normal raman cguru na ang bubbles inig bag-o pa mawala raman after how many hours. ana man sad akoa b4. Much better if you post your pic. & Sir, Sakto na g hatag na website ni andz nimu.

@Andz, pag hilom oi, mas nindot na imung rig sa akoa, wala pa gali na mahuman imung rig, nindot naman gali na samot nana if mahuman na gyud na.

[poldopunk]

his approach is optimal according to my research na unahon ang radiator before getting to the components pero grabeh sad kadaghan sa components na gi cool before mubalik sa rad ang tubig uy. kadtong nag setup mi sa lark kooler, nagpa IM ko ni andz unsaon pag bleed kay naay around 3 inches nga hangin mabilin, akong gibuhat gisaka nako ug maayo ang resevoir/pump from the loop para ang hangin steady ra sa reservoir then i added more water -- turns out nga kuwang pa diay ug tubig. maybe in your case you need to put the reservoir a little higher or level sa imong loop.

@ P0w3rM0v3; can you open a new thread outside diri para dili mosamot ka off topic?
@ Mods; pasayloa lang mi sa among offense karon, medyo na excite lang ang mga tawo nga naa pa diay lain WC enthusiast diri.

[centax error]

i prefer water already cooled down when it enters the pump and straight to the cpu block. No need to worry on high pressure going to the cpu block because most blocks has buffers inside to agitate the flow. Having the radiator or res right after the pump, will kill your flow rate and pressure and imagine how much things are going on in his setup.

[poldopunk]

I created this thread para ma move an conversation from Post Your Rigs to here. Let me quote, the original statement then I'll request for moderators to move the responses on this topic.

@jojobanana92400 tinuod nindot imo rig br0. ka ingon ka na enthusiast jud! idol nag assemble sad ko sa ako bago rig ron bah nya first time nako nag watercooling, nya karon nag pr0blema ko og prime sa ako pump... dli nako ma kuha tanan hangin sa ako loop. naa ka ma advise? gi pindutan man ko sa ako migo na daghan daw mga hinabangon na mga taw dro. mo post nya ko dri inig human sa ako rig.

para lang naa ka idea sa ako loop:

pump+resi > rad > cpu > chipset > gpu > back to the pump+resi

ako problem is on the hose leading to teh radiator from the pump+resi, when I turn off my pump a huge gap of nothing but air comes out from the raditor. so there is 3 inches of tubing starting from the radiator inlet fitting with nothing but air in it.

best wishes ninyo mga idols.
pm