unsay problem ani, computer naku mo-restart kalit?

[bedouin]

---

hello istoryans..

naa jud ko problem ako computer karon bah. mo-restart lang ug kalit after turning it on for 20 minutes, been having this problem for a month now. after mo-restart, kutob ra ang loading sa may HP logo gani....then mo-black/gray screen ba nah for how many minutes..then muhonung na dayun..then ako i-restart again by long press start button. then balik napud loading kutob sa may HP logo or sa may choices gani nga safe mode...etc, or sige lang gray screen..

naglibog najud ko unsaun ni ako computer, ako nani gi-system recovery. wala lang japun resolved ang issue..sige lang jud re-start ako computer ..talagsa/dugay jud ko kasulod


@if naa na gani na post same ani,please lang ko delete..daku lang ako problem karon sa computer. then wala ko kita same ani na post...help please

[vipvip68]

this sounds like a heat issue.

try opening your case and check if your cpu fan is still spinning. Also, dust might be causing the overheating issue.

[benjax]

yup basin na puno na abog ang fan sa cpu,dli na ka penetrate iya hangin...try limpyo nya butangi thermal paste pra cool....

[coolnezz]

https://www.istorya.net/forums/search...=1356037&pp=25

[bedouin]

bag-o pa ni limpyo ako computer last month lang. ESETNOD32 pud ang anti-virus ani karon,updated pud ako Norton which recently gi-delete naku kay nag-error after system restore.

fully scan na pud ni sya. wala may virus. andar man pud ang fan ani sa computer. unsa pa lain na possible solution ani.

[ethzneuron]

heat issue gyapon; basin naughan na ang paste sa procie..

[mrA]

if sure ka na di software related sya... hardware related na... like heat or insufficient power...

hardware related if:
1. it restarts while you were doing CPU or GPU intensive programs.
2. especially when your PSU is generic and old... capacitors degrade with respect to time...
3. you added new components and notice it shuts down after certain minutes after boot.


try exchanging a higher rated PSU...
or disable your cathode lights... disconnect a few case fan (open side panel)... and disconnect your floppy and CD and DVD drives... if mu function xa flawlessly... PSU problem jud na...

good luck!~

[Merman]

what did u do before the imu problem ni occur?

if dli gani sa heat issue or fail psu power output,

1. try testing the integrity sa imu memory bro, use memtest or other memory testing software.
ther are times teh system will automatically restart nd dumps, if the system access / try to use the blocks na defective, memory arent same as hdd, when hdd scanned for bad blocks, i mark mana sa system na bad so skip lang siya pra dli ma access, but in memory as RAM = volatile memory / temporary, dli dyud na ma mark, if bad blok =bad blok dyud.

2. try to diagnose / scan ur hdd for bad blocks, a basic windows chkdsk / scandisk utility will do.
same sa ako giingon ganina, in case of hdd when ur system is accessing a bad sector, duha ray symptom ana, redundant access sa sector which causes the system to operate slowly kai iya man balik2x kon ug read katong sector until maread niya = hdd led blinks always like forever, and 2nd wud be mu restart lang ug kalit.

3. try to check ur mobo caps if dli ba busted / blotted.

can u post detailed specs sa imu pc (hardware nd software, temperature nd mobo voltage = use everest)?

if all fails, contact lang local technical support.

[benson]

sir,
during starting up, press F8 then select "Disable automatic restart..."
to make sure na software related siya. If mo restart na siya with BSOD (Blue Screen of Death)
with error something.. take note of the error:
although their are BSOD that are also related to hardware issues.

if no BSOD, mostly hardware related either defective/loose/heat problem.

troubleshoot hardware parts one at time,
and always be aware of the temperature.

[chill_angel25]

parihas lagi na sa ako bro!..
safe mode ra xa kotob, nya mo restart dayon,,
nya akong g re install ang pc, dili na xa mo continue ug install, mag blue screen xa. nya naay eror(i forgot the error code).
g dudahan sa ako migo kay mobo daw ang problem, kay basted na ang mga resistor. is it true?
unsa man jud diay ang problema? duda sad naku memory & heatsink. peru iya man g pakita gud ang resistor nga na basted....

hahay na stock na noon ang usa ka pc diri sa companya...

sayang ayo oist......
help!