How to Overclock my PC

[GuyOfYourDreams]

---

i have an intel dual core processor 2.0Ghz attached in an Asus p5sd2-vm.. havent tried overclocking ever since man gud, since p3 pa ako pc, hantod nag p4 nlng ko, even until now wa pa ko kasuway overclock coz i dont know unsaon.. i tried to search sa bios menu kung pede ba pasobraann.. wa man.. naako nakit an na e change nimo ang value sa cpu, 1-5 man gibutang and i dont understand it. basig d nya to mao. maguba nya hinuon ug sulayan nako.. hehehe!

Any Help For This

thanks!!!

[eirawn]

Wlay challenge bro kung patabang ka. Dapat ikaw jud ang mo explore ug tweak sa imo HW. Here's a guide

techPowerUp! :: Overclocking is easy. Get results!

[moy2]

Wlay challenge bro kung patabang ka. Dapat ikaw jud ang mo explore ug tweak sa imo HW. Here's a guide

bwahahah.ayaw sd ana bro oi kun siya ra mo overclock agoy asu jud nang agi sa iyang procce.ahahah.bitaw2 sd bro noh dpat xa mo OC.waaaaaaaaaa BITAW2 bro ikaw lng OC ana imu pc.pra ilhan ba na palit jud ka lain procce. nmo.weeeeeee have a nice day.

[Rainerius]

Pag research sa gyud before ka mo attempt og overclock para dili mo kaboom imong pC.

[COMCAM]

I smell smoke . . . just kidding bro - Just be sure that your mobo supports overclocking features

[zyper_jag81]

di lang ko mag oc cguro...hehe

[xxxerorrxxx]

maypa d nlng OC OC dira ..hehehe

[reishoto]

basin mapareha ka adtong thread sa other forum, he asked why wala kuno result sa iya OC n d na mudagan iya comp EVEN IF iya gi-set ang voltage to 3.2V, FSB to 600 and so on, hehehe...

joke lng...

[poldopunk]

i'll keep it simple. the technique is knowing the maximum voltage of the following: processor, chipset, memory and fsb vtt.

1. increase frontside bus, make sure memory is below or within rated speed.
2. run a stability test for 15-30 minutes.
3. if stable go to step 1, else increase processor voltage.
4. if processor voltage doesn't yield any results, increase chipset/fsb vtt voltage.
5. if increasing voltage stabilizes the overclock go to step 1 until voltages are maxed out or if front side bus is already equal to memory speed.

of course if you don't want to touch the voltage, follow steps 1 and 2 then use this for step 3:

3. if stable, go to step 1, else go down 1 notch an check for stability (test for 1-2 hours) until stable.

[vashtinone]

^^nice master-poldo..
this is such a good help to all the newbies of OC.. (like me)..