Help, my PC wont display"

[ninzska21]

---

help! XD

ang pc wont display anything. pero ng dagan ang fan sa HSF

#1 VCard. try na nko gi tantang ang vcard then gi butang nako sa built-in. /Failed
#2 tried the VCard on my other pc. ni on man.
#3 tried cleaning the memory /Failed
#4 tried using another memory /Failed
#5 tried using another PSU /Failed

MOBO kaha ni or CPU.
help mga geeks!

Spec.

CPU: Intel 3.0GHZ 775 dual core
VCard: Inno3d 8500 1G
PSU: 500w Powerlogic
Mobo: Intel D95GAV
Memory: 1x 512 Kingston / 1x 256 PQI

--------------------------------------

help would be much appreciated!

[reishoto]

any beeps? try only mobo, procie n a stick of ram.. no hdd sa. of course naa psu, hehehe. assemble it outside sa casing.

[ninzska21]

No beeps!

"procie n a stick of ram"? la ko kasabot. im assembling it outside the casing now at this moment.! hehehe

/scratching the head

[babolgam]

procie n a stick of ram = processor and a stick of ram man cguro iya pasabot ana. Hehe Mao sad na ako problema sa ako isa ka PC pero karaan lang ni so wala koi spare parts and until now wala pai display. Maki hitch nalang sad ko. Heheh

Naa ko feeling nga d jud na sa imong CPU. hehehe

[ninzska21]

ok gets ko. proc and memory lang nad PSU..
/Failed

MOBO kaha ni?

[reishoto]

stick, one module bro, hehehe. try each module..

3.0G LGA775? is that an E8400? if it is, have u tried updating ure BIOS to support 45nm procies?

before getting to conclusion, try sa ni..
1. Recheck and re-install CAREFULLY your processor.
2. Check if the 12V rail to the motherboard is connected.
3. Check for CMOS battery failures or dislocated ba.
4. Check for bloated or leaked capacitors sa mobo.

[babolgam]

Test daw sir same specs butang sa lain mobo then if ok then problem solved. Hehe. Assuming naa ka diha extra units .

Karon lang nako na basahan ang post ni reishoto, wa ni update dayon anyway back to topic basin mao sad na sir, kuwang flash imo bios. Hehe

[ninzska21]

stick, one module bro, hehehe. try each module..

3.0G LGA775? is that an E8400? if it is, have u tried updating ure BIOS to support 45nm procies?

before getting to conclusion, try sa ni..
1. Recheck and re-install CAREFULLY your processor.
2. Check if the 12V rail to the motherboard is connected.
3. Check for CMOS battery failures or dislocated ba.
4. Check for bloated or leaked capacitors sa mobo.

its a 90nm 3.0GHz man guro. its a dual core but not a 65nm.

#1 - #4 /fail parin.

i have spare pc here. VCard / MOBO / HD are working fine in my spare!

[ninzska21]

Extra unit Spec:

CPU: 1.8 ghz celeron 65nm
Vcard: Build in
Mobo: Asrock Wolfdale
PSU: 500w generic
Memory: x1 512 kingston

[Rainerius]

Yeah Proc and 1 stick of Ram only, see if it powers up without the power supply.