No Boot/No Video after changing proc

[kamandag]

---

Any Idea why? Change processor from p4 1.8 to celeron D 2.26.. Socket 478 Asus P4s533-mx mobo

system turns on heatsink fan spinning but no video/no boot.
tried removing memory - no beep tones
strip down to mobo-proc-psu.. no video gihapon sa monitor.. fan spinning.. psu fan working

this all happened after changing proc..

bad part kay ang usa ka pin sa p4 1.8 nabali after changing back proc..

thanks

[junmar4]

maybe maoy rason kay nabali man kaha.
did you put new thermal paste?

[yugi]

Na bali so wa nimo nakuha ang bali na pin? if wala mao na rason wa ni post.

Else the best thing to do kuhaa ang bali na pin sa socket then after that slowly put all together procie, rams etc.. and see if its working now.

I hope it helps.

[kamandag]

wala man nabilin ang bali.. ang proc karon kay celeron na..

usa pud kay mura'g nadaghanan nako ug butang ug thermal paste.. duda nako mao ni or guba ang celeron nga proc..

but any idea on what other things ang nag cause ani

currently..

gi try nako gitagsa2x

proc+mobo_memory+psu - no boot no video
proc+mobo+psu - no beep tones

maayo unta wala maguba ang mobo proc lng unta guba.. hehehe

[poldopunk]

unsa imo thermal paste? basin conductive na ha...!

[kamandag]

sa teknika man ko nakapalit.. silicon man ang nakabutang..

any idea poldo?