Bro need help on this
dsl/modem to switch port
na a pa n cya e configure para maka
access sa internet ang mga work station
Thanks
Bro need help on this
dsl/modem to switch port
na a pa n cya e configure para maka
access sa internet ang mga work station
Thanks
wala naman bai basta dyanamic dhcp ang gamiton or automatic abtain. . static imong ip configure nalng ang ip kada pc or subnetting para mu kusog ang bandwidth. .
ani ni sxa bai modem to switch cross then switch to workstation or pc's straightru tanan
dretso nana bro. mo connect ra na. plug n play na
Thanks kaayo mga bro's
experiment dyun ta ani he he he
puede ra straight-through tanan nga cables as long as the switch used supports auto-sensing...
depende sa imo set up bro... unsa man na imo dsl modem, modem lang or modem/router na?
if naa nay router pede nimo enable ang dhcp para diretso na.. ang imo mga workstation i set as auto obtain ang IP..
pero if dsl modem ra then u want to share the internet to all workstations pede ka ani na set up..
1.) select one pc to act as your internet server. (select the most powerful PC you have)
a.) dapat duha imo lan card (NIC) for this pc.
b.) ang imo isa ka lan card (say LAN 1) should be connected to the modem (i presume wala kay static IP from ISP), i auto obtain nimo ang IP.
c.) ang second lan nimo (say LAN 2), you will set a static IP for it.. ikaw lang pag igo say 192.168.1.0.......
d.) set static IPs to the rest of the work stations, say 192.168.1.1 and so on.. then in your gateway.. put the IP address of lan 2 (192.168.1.0).
e) enable internet connection sharing (ICS) at LAN1....
ok na...
ok raman modem/router lahos sa switch dili na kinahanglan duha ka lan . . .
gasto na kau kung gusto ka mag server gamit nalng ug handycafe or cafe manila
kung gusto ko mag server maka gasto jud ka ug 2 lan card kay e briged mana
Similar Threads |
|