my experience burning dual layer dvds bought from cdr-king

[siopao1984]

---

i have some issues with dual layer dvds (bought in cdr-king) and i have tried it with 3 different computers with 3 different dvd writers - ASUS / LG and SAMSUNG

dual layer dvds tested bought in CDR King
1. Philips 8x
2. Imation 8x

50% fail rate... so i will be sharing with you my experiences

it states 8x burn speed
when you burn it in nero you will have either one of the following issues:

1. burning in 8x - power fixation error - burn process failed
2. burning in 8x - power calibration error - burn process failed
3. burning in 8x - could not perform end of track - burn process failed
4. burning in 8x - error read write sector - burn process failed
5. burning in 8x - will hang on 98% burn process and would not complete... after 30 mins burn process failed - could not perform end on track.

burning in 4x ok no issues except naa jud discs na guba jud na d ma burn ang first tracks and it will eventually fail at the start of the burn process 2-3% pa lang ang burn...

so suggest ko lang ayaw tuo na 8x na ang ila gbaligya...

mas ok pa gni 2.4x na speed na dual layer although dugay lang gyud imo huwat mahuman burn especially finalizing end track

[Sempron Guy]

nakapalit ko sauna upat ka buok, labay tanan, kay mag-errror, ever since never bothered to look at their dl dvds anymore.

[werty]

i always burn at low-speeds, mostly 8-16x for CD, 8X for DVD....

[siopao1984]

nakapalit ko sauna upat ka buok, labay tanan, kay mag-errror, ever since never bothered to look at their dl dvds anymore.

mao sir... ako gtesting jud kung ako pc ba ang naay problema sa software or ang dvd writer ko... pareha man lang diay sila problema... mas mau pa katong gpalit ko na melody sa global village sa ayala wala jud nagka problema... 4x lang gyud cya

[cointoss]

la mn koy blema sa ila DL's i always buy dl na dvd para sa mkv files nako.. okey ra mn ako xperience wid cdr-king dl's.

bacn sa imo burning sir.. try reinstalling.. den update firmware a imo writer

[werty]

try modded firmwares...

[kell_vern]

gamit nako sony na dvd writer ug gburner, wala may problema.

[siopao1984]

na swertehan lang ko cguro na always Dead Upon Purchasing ang napalit ko na DL sa cdrking

3 computers
3 different os
3 different dvd writers
around 5 different softwares being used as well

50% of the discs are failing to burn....

[kazki]

When i Burn stuffs, I always check "Determine Maximum Speed" on NERO always... All Dvds/CDs i've bought from CD-r king has a 98% chance of being burned. Well, I had like 2 bad burns (out of ~100+ cd/dvds)before but they were from their very cheap CD (that mickey mouse something)...oh well, didn't really count on it.

[siopao1984]

When i Burn stuffs, I always check "Determine Maximum Speed" on NERO always... All Dvds/CDs i've bought from CD-r king has a 98% chance of being burned. Well, I had like 2 bad burns (out of ~100+ cd/dvds)before but they were from their very cheap CD (that mickey mouse something)...oh well, didn't really count on it.

kanang mickey mouse ok na cya na disc... never really had a problem with that... 2.4x lang cya... but ok jud na cya na DL disc...