The original diagram of eryqmb states that we are only allowed to use RIP on R2, and OSPF on R3 and R4, so we should stick on that one. sorry for my first edited diagram that was wrong.
here it should be :
http://i410.photobucket.com/albums/p...frey/dsgn3.jpg
same as b4 they were given a static ip 203.172.11.0/30 by their ISP, configure so that everyone could access the internet...
work only on R1 to accomplish this...
Results 91 to 100 of 203
Thread: Cisco network diagram
-
07-29-2009, 12:40 PM #91Junior Member
- Join Date
- Sep 2006
- Posts
- 66
-
07-29-2009, 12:51 PM #92Elite Member
- Join Date
- Sep 2007
- Gender
- Posts
- 1,103
bro we cannot view ur updated diagram
-
07-29-2009, 01:11 PM #93Junior Member
- Join Date
- Sep 2006
- Posts
- 66
http://i410.photobucket.com/albums/p...frey/dsgn3.jpg
same as b4 they were given a static ip 203.172.11.0/30 by their ISP, configure so that everyone could access the internet...
work only on R1 to accomplish this...
your routing tables would look like this:
ON ROUTER RUNNING RIP ONLY:
Gateway of last resort is 10.0.0.1 to network 0.0.0.0
10.0.0.0/30 is subnetted, 2 subnets
C 10.0.0.0 is directly connected, Serial0/0/0
R 10.0.0.4 [120/1] via 10.0.0.1, 00:00:10, Serial0/0/0
C 192.168.1.0/24 is directly connected, FastEthernet0/0
R 192.168.2.0/24 [120/2] via 10.0.0.1, 00:00:10, Serial0/0/0
R* 0.0.0.0/0 [120/1] via 10.0.0.1, 00:00:10, Serial0/0/0
ON ROUTER RUNNING OSPF ONLY:
Gateway of last resort is 10.0.0.5 to network 0.0.0.0
10.0.0.0/30 is subnetted, 2 subnets
O 10.0.0.0 [110/1562] via 10.0.0.5, 00:05:52, Serial0/0/0
C 10.0.0.4 is directly connected, Serial0/0/0
O E2 192.168.1.0/24 [110/781] via 10.0.0.5, 00:05:52, Serial0/0/0
C 192.168.2.0/24 is directly connected, FastEthernet0/0
O*E2 0.0.0.0/0 [110/1] via 10.0.0.5, 00:05:52, Serial0/0/0
ON ROUTER 1:
Gateway of last resort is 203.172.1.1 to network 0.0.0.0
10.0.0.0/30 is subnetted, 2 subnets
C 10.0.0.0 is directly connected, Serial0/0/0
C 10.0.0.4 is directly connected, Serial0/1/0
R 192.168.1.0/24 [120/1] via 10.0.0.2, 00:00:09, Serial0/0/0
O 192.168.2.0/24 [110/782] via 10.0.0.6, 00:03:06, Serial0/1/0
C 192.168.3.0/24 is directly connected, FastEthernet0/1
203.172.1.0/30 is subnetted, 1 subnets
C 203.172.1.0 is directly connected, FastEthernet0/0
S* 0.0.0.0/0 [1/0] via 203.172.1.1
-
07-29-2009, 02:45 PM #94Junior Member
- Join Date
- Feb 2009
- Gender
- Posts
- 307
hala oist, mura raman ni silag ga ininsik, dli mi kasabot, mga kuyaw ning mga bataa nato ron kay mga gifted child! hehe
-
07-29-2009, 05:42 PM #95Junior Member
- Join Date
- Jun 2009
- Gender
- Posts
- 36
ohmmmm nice topic
-
08-25-2009, 10:27 PM #96C.I.A.
- Join Date
- Oct 2005
- Gender
- Posts
- 5,761
kinsay nay sunod?
-
08-26-2009, 08:18 AM #97Junior Member
- Join Date
- Mar 2008
- Gender
- Posts
- 133
Si je0frey pa cguro?
-
08-26-2009, 08:23 AM #98C.I.A.
- Join Date
- Oct 2005
- Gender
- Posts
- 5,761
wala pa man hehe asa nmn ni c jeofry
-
08-26-2009, 09:01 AM #99Junior Member
- Join Date
- Mar 2008
- Gender
- Posts
- 133
Ikaw nlng sa bai r0mm3L...
mura dugay2x nasab ni nga thread na hilom.
-
08-26-2009, 09:07 AM #100C.I.A.
- Join Date
- Oct 2005
- Gender
- Posts
- 5,761
waaa mag design sa ko, while waiting for jeof hehe
Originally Posted by eryqmb
Ikaw nlng sa bai r0mm3L...
mura dugay2x nasab ni nga thread na hilom.
Reply With Quote Advertisement
Similar Threads |
|
Posting Permissions
|