ang gihatag nila nga modem is zyxel p-600 series..nagpalit ko ug linksys wrt54g wireless,unsaon pagconfigure ni?
ang gihatag nila nga modem is zyxel p-600 series..nagpalit ko ug linksys wrt54g wireless,unsaon pagconfigure ni?
ang linksys man cguro imo econfigure ana bro
Originally Posted by sleepydeepeyed
configure that zyxel into pure bridge mode and set the PPPoE settings on that linksys of yours.
maoba ako itry bro..coming pa akong linksys....naka try ka bro?ok ra lagi sya?ako gi tanaw ang modem nako naka bridge mode naman...naa diay pppoe option sa linksys?
Router configuration:
Reminder: Zyxel's default IP address is 192.168.1.1 and WRT54G's default IP address is 192.168.1.1... with that defaults setting there would be an IP address conflict, inorder to avoid this conflict you should assign the routers fixed IP as 192.168.1.2 and for other devices and computers attached to the router it should be 192.168.1.3 and so on....
To setup the IP address of the router you must connect the router directly to the computer without attaching the modem to the router because it would cause IP address conflict and you won't be able to go to the setup page of your router, assign your routers IP address as 192.168.1.2.
Question: How do you log-on to your ISP's internet? Did did they give you a username and password or an IP address...
If they gave a username and password then you should go to PPPOE setup
if they gave you an IP address then go to Fixed IP setup
or if you dont know what to do then go to automatic DHCP setup
and there you go....that's it....
problem solved bro...thanks mch...
bro,naa diay ko problem aning linksys router nako...dugay sya maka connect gyud ..sige lng Connecting until na ma Disconnected na ang status..once disconnected na sya dili na sya mo autoconnect kinahanglan pa i Click ang Connect button..
I upgrade ang firmware sa imong linksys....mao ra na imo kulang...para di ka maglisod ... i-try ang LIVE CHAT sa linksys...ila ng tech support...tudluan ka nila unsaon pag upgrade....kasagaran mga pinoy makatubag sa imo..
read the manual.Originally Posted by sleepydeepeyed
set you zyxel to bridge mode and set your router to PPPoE
Similar Threads |
|