What do you use to clean?

[lendags]

---

Mga ka istoryans and computer enthusiasts, mo ask lang ko unsay gamit ninyo pang limpyo sa inyong computer, especially ang case. Like I know microfiber cloth jud gamiton or anything that can minimize scratches, pero what solution inyo gamit? Do you wipe it with alcohol? Water? I used to use cheapo cases on our last 3 computers, pero on my personal gaming pc na, I'm on my 2nd, and pricier pd, used N200 from CM sauna, and man, that thing got scratches all over. Now using Fractal Define Mini C, hadlok ko magka scratch and rust ang case.

Last week lang, I used alcohol wipes packets to clean off oil prints(left by my oily hands) on my case and followed it up with a dry microfiber cloth, did the job, but, maybe there's a better way.

Thanks sa mga inputs ninyo guys. And how often do you guys clean the inside of the PC?

[juks]

As for me, kusog nga blower then followed by brush and cloth(microfiber is better) then on the glass/acrylic part, lcd cleaner and microfiber cloth.

[Jess_V]

ground your case and blower/vacuum those suckers....I use 10 gallon shop.vac

[lendags]

As for me, kusog nga blower then followed by brush and cloth(microfiber is better) then on the glass/acrylic part, lcd cleaner and microfiber cloth.

Wala kay liquid gamiton sa case itself bro? Living in a bit dusty place man gud, need to constantly wipe off the outside surface to keep it as clean as possible. Some dirt are just so stubborn nga dli matang2 ug blower.

ground your case and blower/vacuum those suckers....I use 10 gallon shop.vac

I do that whenever I clean my rig entirely which I do every 2 months as part of my maintenance. Inside doesn't get that much dirty compared to the outside. My case just loves my hand oils and can't be removed by dry wiping alone. Any chemicals or liquids you use to wipe em off clean without damaging paint or rusting?

[juks]

Wala kay liquid gamiton sa case itself bro? Living in a bit dusty place man gud, need to constantly wipe off the outside surface to keep it as clean as possible. Some dirt are just so stubborn nga dli matang2 ug blower.

Adto ra nimo i spray sa microfiber cloth the solution sa LCD cleaner(I use Cliptec LCD cleaner) then maoy i wipe sa surface to clean. But before doing that i blower sa ang surface and brush it with the brush that came with the LCD cleaner. Mao ra nay ako gamit pud sa visor sa ako helmet for about a year now and clear pa ang visor except sa visible scratches due to handling.hehe

It is normal to get minimal scratches sa imong glass/acrylic part sa case magkadugay pero very fine ra nga di nimo maklaro. Just a tip, to minimize scratches better, remove your glass/acrylic part(removable na usually) then wash it with running water then paugha lang by air. After ana wipe it with the solution and microfiber cloth.

As for the rust sa metal parts, wa koy nabantayan rusting with my 2 cases. Or maybe naa lang problema ako mata.hehe

[lendags]

Aryts boss juks. Suwayan na nako. Asa kaha ta maka palit anang Cliptec solution?

[juks]

Last ko nagpalit was in PCQuickbuys sa SM City. Katong dagko ako gipalit murag 400 or less. Cliptec LCD Cleaner.