Why would computer automatically restart after being turned off?

[killravel]

---

Hi Istoryans!
Kindly remove or move if I post a wrong thread(I tried to search same thread but got no result in here)
My prob is about pc na mo restart siya every time I turn it off for first time,
pero if e turn off nku sya second time around, ok na sya?
Onsa ang probable cause niya?

[werty]

post specs and OS used. new install ni?

[killravel]

Windows 7 Home Basic --> OS
4gb ram ddr3
500gb hdd
Intel® Core™ i3 Processor
this was installed about a month already, karun lang ni sya nag in-ani.

[werty]

software problem guro, causing problems on restart. ma try nmo remember unsay gibuhat or unsay gi install before nag problema sya? try removing it.

[killravel]

basen, salamat sa idea, basen tood tungod ni sya sa giinstall nku kay wah man ni sya mag in ani before. "boang man d i ko!"
Salamat!

[nculver12]

try this method

Right click "My Computer"
Select "Properties"
Go to "Hardware Device"
Click "Device Manager"
Select "Network Adapters"
Select "Marvell Yukon .....PCI-Fast Ethernet Controller--> right click ---properties--->power management-->deselect "Allow the computer to turn off this device to save power"--->Go to "Advanced" tab--->put value off for "Wake from shut down" --->value none for "Wake up capabilities"
press OK


If this doesn't work then check your BIOS

Restart ---> press F2---> go to "Main" tab --->Network boot [Disable] --- Save

[killravel]

try this method

Right click "My Computer"
Select "Properties"
Go to "Hardware Device"
Click "Device Manager"
Select "Network Adapters"
Select "Marvell Yukon .....PCI-Fast Ethernet Controller--> right click ---properties--->power management-->deselect "Allow the computer to turn off this device to save power"--->Go to "Advanced" tab--->put value off for "Wake from shut down" --->value none for "Wake up capabilities"
press OK


If this doesn't work then check your BIOS

Restart ---> press F2---> go to "Main" tab --->Network boot [Disable] --- Save

I tried that one already, got no effect, mo restart japun

[coolnezz]

try this method

Right click "My Computer"
Select "Properties"
Go to "Hardware Device"
Click "Device Manager"
Select "Network Adapters"
Select "Marvell Yukon .....PCI-Fast Ethernet Controller--> right click ---properties--->power management-->deselect "Allow the computer to turn off this device to save power"--->Go to "Advanced" tab--->put value off for "Wake from shut down" --->value none for "Wake up capabilities"
press OK


If this doesn't work then check your BIOS

Restart ---> press F2---> go to "Main" tab --->Network boot [Disable] --- Save

How would you know her NIC was Marvell Yukon?

[coolnezz]

Try going to the BIOS and turn off "Wake On Lan"

If you're using wired network, try disconnecting the cable first before shutting it down.
If it doesn't restart, then it's a WOL issue.

[woodpusher]

Go to device manager ---> network adapter ---> your network card --> right click ---> properties ---> power management. Check if "allow this device to wake up computer from standby mode" is selected, if so then uncheck it. Go to your bios and disable wake up on lan , or disable any setting that can bring the computer up from sleep.