Results 1 to 8 of 8
  1. #1

    Default Post your highest OVERCLOCKS here


    I saw this in other forums and I just thought it might be cool to have it here too.

    I'll start:
    AMD 3200+ (2.0Ghz) on an MSI Neo4-F w/ 1GB Kingston(Hynix chip) DDR400.
    Stock cooling. idle temp 41 degrees.

    Highest running OC: 2.7Ghz
    CPU HTT(FSB): 270Mhz
    CPU Multi: 10x
    LDT Multiplier: 4x
    RAM Frequency Ratio Division: 166Mhz 5/6 0.83 DDR333
    HTT Bus Speed: 1080Mhz
    Ram Speed: 224Mhz
    Highest temp: 59 degrees.

    [img width=410 height=500]http://valid.x86-secret.com/cache/103633.png[/img]
    http://valid.x86-secret.com/show_oc?id=103633
    Comments: This was a good combo. Unfortunately in under a few minutes with prime95 my hardware sensor would detect CPU temps from 42 Deg to 59 Deg. Not good.

    Alternate Combination
    Most efficient OC: 2.61Ghz (Still subject to more tests but this setup looks promising.)
    CPU HTT(FSB): 290Mhz
    CPU Multi: 9x
    LDT Multiplier: 3x
    RAM Frequency Ratio Division: 166Mhz 5/6 0.83 DDR333
    HTT Bus Speed: 870Mhz
    Ram Speed: 237.27Mhz
    Highest temp: 53 degrees

    [img width=410 height=500]http://valid.x86-secret.com/ccpuz.php?id=105269[/img]
    http://valid.x86-secret.com/show_oc?id=105269
    Comments: Initial prime95 tests show that temps hold at 53 deg and hardly moved after 2 hours.


    Let's follow this format. minimize OTs and if you want to know about Overclocking it's on a sticky in this section.

  2. #2

    Default Re: Post your highest OVERCLOCKS here

    Hope this becomes a sticky.

  3. #3

    Default Re: Post your highest OVERCLOCKS here

    my old pentium4
    P4 550(3.4ghz) @ 4.4ghz
    benchable and primed with 4-4-4-8 timing(the CPUZ validation is @2-3-3-5)

    pentium4 550(3.4ghz) on an ABIT AS8 w/ 1GB corsair(TCCD chip) DDR400.

    Highest running OC: 4.4ghz
    CPU HTT(FSB): 259Mhz
    CPU Multi: 17
    RAM Frequency Ratio Division: 200Mhz 1:1 2-3-3-5 DDR400
    Ram Speed: 259Mhz


    CPUZ>>>http://valid.x86-secret.com/show_oc.php?id=27316

    [img width=500 height=391]http://i26.photobucket.com/albums/c112/DDDDDD6/44ghz.jpg[/img]

    my A64 venice 3800 @ 3ghz with 1.8V
    totaly not benchable
    can run games and everyday PC usage but will fail prime95 after 3 hours.
    benchable @ 2.9ghz

    AMD 3800+ (2.4Ghz) on an DFI SLI-D w/ 1GB mushkin redline( chip) DDR400.

    Highest running OC: 3Ghz
    CPU HTT(FSB): 250Mhz
    CPU Multi: 12x
    LDT Multiplier: 4x
    RAM Frequency Ratio Division: 200Mhz 1:1 2-2-2-5 DDR400
    HTT Bus Speed: 1080Mhz
    Ram Speed: 250Mhz


    CPUZ>>>http://valid.x86-secret.com/show_oc.php?id=64433

    [img width=500 height=390]http://i26.photobucket.com/albums/c112/DDDDDD6/A64-3ghz.jpg[/img]

  4. #4

    Default Re: Post your highest OVERCLOCKS here

    Bai, just because you can use it on normal day to day applications doesn't mean it IS stable. hehehe... Like my post up there nga 2.7ghz lagi. Duwa pako mga games like FEAR and GRAW but when I ran prime95 grabe kaayo mo skyrocket ang temps!

    But impressed ko anang usa ka entry nimo bai. 250mhz ram speed? wtg!!!

  5. #5

    Default Re: Post your highest OVERCLOCKS here


    AMD Athon64 3500+ on DFI LanParty nF4 Ultra-D and 1Gb OCZ EL Platinum Rev.2 (TCCD) Ver. 1.0

    Current OC: 2.7Ghz 1.6v (Limited by cooler)
    FSB (HTT): 300
    Multiplied by: 9x
    LDT: 3x (1.8Ghz HTT Speed)
    Ram Divider: 1:1 (200Mhz)
    Ram Speed: 600Mhz DDR @ 2.5-4-3-7 Timings 2.7v

    Benchable and tested with Prime95, OCCT, Hot CPU Tester, Memtest86+, SuperPi.. max Temp is @ 51deg.
    Used for Video Editing, Graphic Production, Animation, Games pajud diay..

    [img width=410 height=500]http://valid.x86-secret.com/ccpuz.php?id=105403[/img]

  6. #6

    Default Re: Post your highest OVERCLOCKS here

    Quote Originally Posted by tokidoki
    Bai, just because you can use it on normal day to day applications doesn't mean it IS stable. hehehe... Like my post up there nga 2.7ghz lagi. Duwa pako mga games like FEAR and GRAW but when I ran prime95 grabe kaayo mo skyrocket ang temps!

    But impressed ko anang usa ka entry nimo bai. 250mhz ram speed? wtg!!!
    thats why i specificaly mentioned that "it would fail prime95 after roughly 3 hours" and also mentioned "not benchable".i never tried to pass it on as a stable overclock.
    besides...i wasnt too keen on using 1.8V even if it was stable eventho i never reached 50C on full load or when usinf prime95 while overclocked.

  7. #7

    Default Re: Post your highest OVERCLOCKS here

    Faet. Mao ra tawn. Hadlok tawn makit-an sa ilang dealer.

  8. #8

    Default Re: Post your highest OVERCLOCKS here

    New OC setting.

    Highest running OC: 2.55Ghz
    CPU HTT(FSB): 300Mhz HOOYA!!!!
    CPU Multi: 8.5x
    LDT Multiplier: 3x
    RAM Frequency Ratio Division: 166Mhz 5/6 0.83 DDR333
    HTT Bus Speed: 900Mhz
    Ram Speed: 231Mhz
    Highest temp: 52 degrees.

    [img width=410 height=500]http://valid.x86-secret.com/ccpuz.php?id=106912[/img]
    http://valid.x86-secret.com/show_oc?id=106912

  9.    Advertisement

Similar Threads

 
  1. Post your ArtWork here
    By milk in forum Arts & Literature
    Replies: 3139
    Last Post: 05-12-2023, 09:53 PM
  2. Post your download speed here... in KB/s
    By FLiP in forum Networking & Internet
    Replies: 232
    Last Post: 12-01-2011, 05:47 AM
  3. Replies: 479
    Last Post: 05-23-2011, 07:09 PM
  4. Post Your Travel Agency Here
    By chesrem in forum Destinations
    Replies: 353
    Last Post: 04-27-2011, 11:50 AM
  5. Post your highest CPU overclock
    By yob in forum Computer Hardware
    Replies: 10
    Last Post: 04-07-2006, 04:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top