I saw this in other forums and I just thought it might be cool to have it here too.
I'll start:
AMD 3200+ (2.0Ghz) on an MSI Neo4-F w/ 1GB Kingston(Hynix chip) DDR400.
Stock cooling. idle temp 41 degrees.
Highest running OC: 2.7Ghz
CPU HTT(FSB): 270Mhz
CPU Multi: 10x
LDT Multiplier: 4x
RAM Frequency Ratio Division: 166Mhz 5/6 0.83 DDR333
HTT Bus Speed: 1080Mhz
Ram Speed: 224Mhz
Highest temp: 59 degrees.
[img width=410 height=500]http://valid.x86-secret.com/cache/103633.png[/img]
http://valid.x86-secret.com/show_oc?id=103633
Comments: This was a good combo. Unfortunately in under a few minutes with prime95 my hardware sensor would detect CPU temps from 42 Deg to 59 Deg. Not good.
Alternate Combination
Most efficient OC: 2.61Ghz (Still subject to more tests but this setup looks promising.)
CPU HTT(FSB): 290Mhz
CPU Multi: 9x
LDT Multiplier: 3x
RAM Frequency Ratio Division: 166Mhz 5/6 0.83 DDR333
HTT Bus Speed: 870Mhz
Ram Speed: 237.27Mhz
Highest temp: 53 degrees
[img width=410 height=500]http://valid.x86-secret.com/ccpuz.php?id=105269[/img]
http://valid.x86-secret.com/show_oc?id=105269
Comments: Initial prime95 tests show that temps hold at 53 deg and hardly moved after 2 hours.
Let's follow this format. minimize OTs and if you want to know about Overclocking it's on a sticky in this section.