i need help guys to my WRT310N cant access the configuration...

[moy2]

---

here my problem guys...i update my firmaware and after updating i was wondering i cant access my router configuration.even in the cd of the router cant access the configuration...wat hapen guys? i did reset and everything...nothings happen....plss help me mga guro in there....ma revive pakha ni? if naai welling mo help dra just reply k2ng mangayu og talent fee jst txt me...09236409030 thanks...

[icecold]

are you sure you uploaded the right firmware for your equipment? was the updating finished completely? if the device is still under warranty, maybe you may consider a warranty claim.

[jackdi]

Here are my suggestions:

#1
Try a cabled setup.
..plug in a cat-V cable to the router and to your computer.
Then enter the config page dayon by typing 192.168.1.1 in your web browser.
If your computer detects a LAN connection, dapat makasulod jud ka.

#2
If dili gani siya mo-sulod, press the reset button for 12 seconds.
..mo-reset na siya to factory default.
...then connect via cable and enter into the config page.

#3
If it does not work, unplug the cat-V cable from your computer.
Turn on the router, nya pour water over it!
Kana, mo-smoke effect jud na!


#4
No.3 is just a joke, so follow IceCold's advice. Claim for warranty.


Good Luck!

[Merman]

hello bro, basin nausab iya ip address sa lan bro.

[calcio11]

#1: Connect the router to your PC with a LAN cable.
#2: Check the IP address of your computer if it starts with 192.168.1.***, if not, manually configure LAN properties:
IP address: 192.168.1.101
Subnet: 255.0.0.0
DNS servers: 208.67.222.222, 208.67.220.222
#3 Then try to login to your router configuration and re-setup accordingly.

[babolgam]

you don't need DNS servers to access your config webpage, just put in the default gateway, usually it's 192.168.1.1. Follow jackdi's statements and your good to go else it's epic fail(bitaw warranty claim last resort jud)..

@jackdi - ROFL @ #3 suggestion ...nice one

additional comment:

You could also do this. http://www.zyxel.com/web/support_kno...20040812093058

Note: that is only an example, try to search for your model in the mfg website

[moy2]

tnx sa mga reply guys....tanan inu suggestion ako nana g buhat jud intwn...ahhhmm sigi lng someones helping me hes a istoryan also....il just update if ma revive pa 2 xa...kai i think need jud 2 og expert ing.a2 na probs jud....ahihiih....lets just w8 for tmrw's update...thanks...anyway wala nani warranty sd diay...

[moy2]

guys and modz plss closed kai na solved na ako prob...thanks to sir dammy....