Waste Ink Pad Counter Resetter

[burikoy12]

---

Mga bro, naa mo'y Service Adjustment Program para sa Epson C90? Kanang software gani gigamit aron sa pagreset sa Waste Inkpad Counter. Puro man di modagan ning ako-ang nadownload. Thanks a million.

[burikoy12]

Please mark this thread as "solved".

[pridi]

gi unsa pag solve? para maka tabang pud sa mga uban nga mka experience ani....

[rkc_888]

call Cebu Protech 3446900 Epson Authorized Service Center

[burikoy12]

Ok mga bro. Ako lang ipost mga links kun asa kadownload sa software ug unsaon pod paghack sa adjustment program aron modagan kay ang installer dili mo-run without a little butingting. Unya na lang kay tua sa akong Linux PC ang bookmarks.

[burikoy12]

Sa mga Epson printer users out there:

Epson printers have an internal counter for its waste ink pad (a pad that absorbs all that waste ink). For example, cleaning the printer head will be counted as 2 points. Usually, when the counter reaches 8,000, the printer will stop working and the ink out indicating LED will blink alternately with the power LED. You will then get the "a part has reached its service life" error. This counter needs to be reset to be able to use the printer again. You can bring your printer to an authorized service center and have it reset for a fee (600.00 last time I had it reset. Matod pa sa akong mga barkada, natigbasan daw ko.) Or you can do it yourself. Here's how...

1. Download an adjustment program. For most Epson printers, the SSC Software Utility will do. For Epson C-90 however, SSC has not been updated. Another Adjustment program can be downloaded here:

http://fileshare.eshop.bg/download.php?fileid=34485.

Unfortunately, this program needs further tweaking before it becomes usable, otherwise you will get the "This program cannot be used" error. To tweak this program into action refer to this blog page:

http://adjustmentprogram.com/34/solu...resetter.html/

Everything should work fine if you follow the instructions on that webpage. Just follow the onscreen instructions to reset your waste ink pad (for C-90 printers).

2. For other Epson printers, use the SSC. You can download it here:

http://www.ssclg.com/epsone.shtml

After installing this utility, run it and then click on the Configuration tab and set the "Installed Printer" and "Printer Model" to your printer's specs. Then minimize the SSC to system tray. Right click on its system tray icon, point on "Protection Counter" and then click on "Reset Protection Counter". That should do the job.

[blitzroy]

try ni nko beh...

thanx man..

[bukog]

very helpful :mrgreen:

[viking]

unsaon pag gamit aning SSC na program for epson printer? i want to use it unta for my EPSON C45 printer

[rkc_888]

Open your SSC Service Utility v4.30
Configuration
Installed Printers: Epson C45
Printer model: Epson Stylus C4x <<<< epson c45 series so pwede cya.

before you use the application try to explore it.