Xperia X1 Custom Roms

[ckice168]

---

Hi,

Anyone tried using a custom rom for the Xperia X1? In particular I'm curious on:

http://forum.ppcwarez.org/viewtopic.php?f=303&t=59475

Thanks!

[king831]

Hi,

Anyone tried using a custom rom for the Xperia X1? In particular I'm curious on:

http://forum.ppcwarez.org/viewtopic.php?f=303&t=59475

Thanks!

hi there,good thing naa na ky xperia always wanted to change roms but dont know how what i did was only upgraded to a higher rom,mau na ba na anyway,anyway if naay better rom pls tell me,ty

[ckice168]

im so curious to try but according to the forums the landscape mode when switched to qwerty doesnt work with manila. will wait for a new version with slide support pa. i also heard it eats battery faster because of the 3d.

[stealthghost]

Flash via micro-sd method
-Make sure x1 is hard-spl first
-Make sure your micro-sd is formatted w/ fat-32
-rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that on your X1's sd-card
-Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
-Then follow the on-screen instruction

naa ra didto ang instructions...
mas ganahan ko anang Flash by SDCARD gamitun.. same ra man ghpon output ana.. re-flashed rom

ganahan ta ko mo-sulay ani nga rom.. but I've just done a hard reset recently.. maybe after 2 weeks..

nag suway ka og Manila 3D ckice168? Slow ang performance?

tempted ko da... after reviewing...

[ckice168]

i just installed manila 3d. i disabled it from the xperia main screen n installed it by panel use. its not bad. no landscape support though

[king831]

oke i will fix the step for you..

1.Install 3D Touch Floo Manila full HD.cab. Manila is the latest version of 3Dtouch floo by icje will full Touch pro application on it you can download in : RapidShare: Easy Filehosting
2.Install cmEXlandscape, it is landscape mode by chalil
3.Install second today (no 2 and 3 : RapidShare: Easy Filehosting)
4.Install motoScript-4.1 PPC.according my experience it is for fix many problem on x1 during you use 3Dtouch floo like frezee when you select the other panel ect( www.sto-helit.de - Page not found )
5.add tf-portr.mscr on \Windows\StartUp. it is for handling camera key problem because if you install landscape mode application, camera key on the side of phone will be disable so with this file camera key will be in the right soft key.http://forum.xda-developers.co...php?t=47161*0
6.soft reset
7.you can install Angelusz anX1 landscape mode.cab but u must uninstall no 2 first.it is other landscape mode application with differ skin.
try this it might help

[ckice168]

wow! that really helped. it made the tf3d run a lot faster also! thanks!

[stealthghost]

akong gi-suwayan ang ROM from the link...

medyo buggy pa siya... I've installed also ang gi-suggest ni king831...

there are some programs I've installed before sa old xperia rom nga di mo-dagan ron with Manila 3D..

[ckice168]

stealthghost

after installing a custom rom, is it possible to go back to the original rom?

[stealthghost]

uu... pwede kaayo.. I've re-flashed my rom 2wice na..

I've done these:

1.) Download this file xda-developers or read through here... Hard-SPL for Xperia X1 - Released! - xda-developers
2.) Connect your phone through Activesync
3.) extract and run the X1_HardSPL.exe - naa na'y auto extract mahitabo and it will be like reflashing rom mahitabo
4.) Just follow the instructions til mag reboot imu phone to its normal Today Screen.
5.) Download the original ROM or any ROM compatible sa X1 and reflash the ROM...

ambot kung para asa ang SPL, wa na ko ka-agi ana before kay kutob ra ko Smartphone 2003 before then jump to WinMo 6.1, but I think it will unlock something para maka-reflash og ROM. It will revert the system to some state..

coz I've tried using this method before reflashing to the Touch-IT 3.5 WWE, katong naa sa link nimo..

edit:
i've tried reflashing without the Hard SPL, wa'y reflashing mahitabo.. 0% ra permi..