All about woodworking

[waterboy0911]

---

Bro Trimmer imo pangita? ako pod gusto palit ani bro...

http://www.popularwoodworking.com/wp...05_2D00_41.jpg

mao ni bro?

Good kaayo ni bro for wood.. Pwede sad ni sa HPL high pressured laminates (formica, mikarta are brand names)

Downside: frequent change sa blade or sharpening.. Handy

For powertools edging gamit nalang ug portable trimmer with flush cutting bit...
Pros: can cut a lot with a single bit
Cons: contact cement (rugby is a brand name) build up that will clug the bearings


Balik ta sa wood putty vs. body filler.. It's totally different especially for applications..

In wood working especially wood.. We don't recommend using body filler..why

Body filler don't absorb finishes.. While wood filler does..
Limitations in using wood fillers..

Wood fillers can fill up to 2mm diameter, more than that plug with same materials..
Other option to fill in pin holes..
Use a saw dust that are fine (saw dust made from sanding) and mixed it with pva adhesive..(white glue) then start filling the pin holes.. Let it dry then sand it with a sand paper..

Body fillers commonly used for automotive finishes..

If you ask me, can i use body filler as an alternative.. It's a No no, especially i'm dealing with stained finish, and how much more on natural finish..

Edge banding:
Use pvc strip as thin as 1mm and it is available in the market.. Hpl can be used but it's hard to trim and handle..
There are also available thicker pvc with pre adhesive. Just heat with a hot iron to bond the pvc to your edge..

Metal vs. wood as carcase for sofa..

For metal: use aluminum..

Pros: easy to produce
Lighter material, just powder coat to protect it from rust

Cons: mag away mo sa upholster kay limited ra ang ma tackeran..

Wood: nahan kaayo ang upholster ani kay dali ra maka buhat sa sofa..
Cons: anayon kung d maayo pag treat sa wood..


Guys sorry if karon ra gyud ko maka reply.. I don't have the luxury of time to answer all your questions but, i make sure to answer them all whenever i can..

- - - Updated - - -

Bro Trimmer imo pangita? ako pod gusto palit ani bro...

http://www.popularwoodworking.com/wp...05_2D00_41.jpg

mao ni bro?

Good kaayo ni bro for wood.. Pwede sad ni sa HPL high pressured laminates (formica, mikarta are brand names)

Downside: frequent change sa blade or sharpening.. Handy

For powertools edging gamit nalang ug portable trimmer with flush cutting bit...
Pros: can cut a lot with a single bit
Cons: contact cement (rugby is a brand name) build up that will clug the bearings


Balik ta sa wood putty vs. body filler.. It's totally different especially for applications..

In wood working especially wood.. We don't recommend using body filler..why

Body filler don't absorb finishes.. While wood filler does..
Limitations in using wood fillers..

Wood fillers can fill up to 2mm diameter, more than that plug with same materials..
Other option to fill in pin holes..
Use a saw dust that are fine (saw dust made from sanding) and mixed it with pva adhesive..(white glue) then start filling the pin holes.. Let it dry then sand it with a sand paper..

Body fillers commonly used for automotive finishes..

If you ask me, can i use body filler as an alternative.. It's a No no, especially i'm dealing with stained finish, and how much more on natural finish..

Edge banding:
Use pvc strip as thin as 1mm and it is available in the market.. Hpl can be used but it's hard to trim and handle..
There are also available thicker pvc with pre adhesive. Just heat with a hot iron to bond the pvc to your edge..

Metal vs. wood as carcase for sofa..

For metal: use aluminum..

Pros: easy to produce
Lighter material, just powder coat to protect it from rust

Cons: mag away mo sa upholster kay limited ra ang ma tackeran..

Wood: nahan kaayo ang upholster ani kay dali ra maka buhat sa sofa..
Cons: anayon kung d maayo pag treat sa wood..


Guys sorry if karon ra gyud ko maka reply.. I don't have the luxury of time to answer all your questions but, i make sure to answer them all whenever i can..

[blotot]

@ Waterboy

Bro ask lang ko unsa imo opinion sa OZITO na brand from australia?

Plan to buy router and table from this brand...

[waterboy0911]

@ Waterboy

Bro ask lang ko unsa imo opinion sa OZITO na brand from australia?

Plan to buy router and table from this brand...

Not familiar sa brand bro..
But let us make it a habit when buying unfamiliar brands..
1. Service center.. Is it available locally..
2. Are parts and accessories available locally ( add ons)
3. Check reviews on the Internet but look for a third party blogger kay bias ang uban..
4. Ayaw tuo sa sales man..
All they care about is sales.. They can sell crappy things and tell you how great that crappy tool is..


Nag palit ko ug ryobi na brand.. So far wala ko problem as long as you know the capacity what your tool can do..

Maintenance
Always know your tool.. Common ma hurot is ang carbon brush.. Be sure kabalo sad ka sa parts and where to oil and stuff..



To add:
When buying plunge router be sure you have the right speed.. Be sure at least you have 2hp amd above.. And a 1/2 shank extra couplings for 1/4 router bits.. Mao na sya ang pinaka important details you need when buying plunge router..

For trimmer 1/2 to 1hp is okay and a 1/4 shank..

[blotot]

@ waterboy

Salamat kau sa info sa Plunge router mao ni ako dapat mahibaw an...Ozito kay new zealand made for AUS market...home use ra gyud...

[TechXavi]

Good kaayo ni bro for wood.. Pwede sad ni sa HPL high pressured laminates (formica, mikarta are brand names)

Downside: frequent change sa blade or sharpening.. Handy

For powertools edging gamit nalang ug portable trimmer with flush cutting bit...
Pros: can cut a lot with a single bit
Cons: contact cement (rugby is a brand name) build up that will clug the bearings


Balik ta sa wood putty vs. body filler.. It's totally different especially for applications..

In wood working especially wood.. We don't recommend using body filler..why

Body filler don't absorb finishes.. While wood filler does..
Limitations in using wood fillers..

Wood fillers can fill up to 2mm diameter, more than that plug with same materials..
Other option to fill in pin holes..
Use a saw dust that are fine (saw dust made from sanding) and mixed it with pva adhesive..(white glue) then start filling the pin holes.. Let it dry then sand it with a sand paper..

Body fillers commonly used for automotive finishes..

If you ask me, can i use body filler as an alternative.. It's a No no, especially i'm dealing with stained finish, and how much more on natural finish..

Edge banding:
Use pvc strip as thin as 1mm and it is available in the market.. Hpl can be used but it's hard to trim and handle..
There are also available thicker pvc with pre adhesive. Just heat with a hot iron to bond the pvc to your edge..

Metal vs. wood as carcase for sofa..

For metal: use aluminum..

Pros: easy to produce
Lighter material, just powder coat to protect it from rust

Cons: mag away mo sa upholster kay limited ra ang ma tackeran..

Wood: nahan kaayo ang upholster ani kay dali ra maka buhat sa sofa..
Cons: anayon kung d maayo pag treat sa wood..


Guys sorry if karon ra gyud ko maka reply.. I don't have the luxury of time to answer all your questions but, i make sure to answer them all whenever i can..

- - - Updated - - -




Good kaayo ni bro for wood.. Pwede sad ni sa HPL high pressured laminates (formica, mikarta are brand names)

Downside: frequent change sa blade or sharpening.. Handy

For powertools edging gamit nalang ug portable trimmer with flush cutting bit...
Pros: can cut a lot with a single bit
Cons: contact cement (rugby is a brand name) build up that will clug the bearings


Balik ta sa wood putty vs. body filler.. It's totally different especially for applications..

In wood working especially wood.. We don't recommend using body filler..why

Body filler don't absorb finishes.. While wood filler does..
Limitations in using wood fillers..

Wood fillers can fill up to 2mm diameter, more than that plug with same materials..
Other option to fill in pin holes..
Use a saw dust that are fine (saw dust made from sanding) and mixed it with pva adhesive..(white glue) then start filling the pin holes.. Let it dry then sand it with a sand paper..

Body fillers commonly used for automotive finishes..

If you ask me, can i use body filler as an alternative.. It's a No no, especially i'm dealing with stained finish, and how much more on natural finish..

Edge banding:
Use pvc strip as thin as 1mm and it is available in the market.. Hpl can be used but it's hard to trim and handle..
There are also available thicker pvc with pre adhesive. Just heat with a hot iron to bond the pvc to your edge..

Metal vs. wood as carcase for sofa..

For metal: use aluminum..

Pros: easy to produce
Lighter material, just powder coat to protect it from rust

Cons: mag away mo sa upholster kay limited ra ang ma tackeran..

Wood: nahan kaayo ang upholster ani kay dali ra maka buhat sa sofa..
Cons: anayon kung d maayo pag treat sa wood..


Guys sorry if karon ra gyud ko maka reply.. I don't have the luxury of time to answer all your questions but, i make sure to answer them all whenever i can..

Patay nagamit na nuon nako body filler, wala man gud kaila ang tindero ug wood filler, mao man ang gihatag nagtuo pud ko nga same ra sila. Bantog ra lain kaayo ug color. Labi na nga ako pa plano nga i stain siya. sige nalang.

Unsa nga ryobi imo napalit sir? asa pud nimo siya napalit? wala man gud lain makita nako online namaligya, naa pud lage sa luzon, ipadala pa diri. Naa ba kaha na diri sa Cebu.

- - - Updated - - -

@ Waterboy

Bro ask lang ko unsa imo opinion sa OZITO na brand from australia?

Plan to buy router and table from this brand...

sir ang imong avatar kay disturbing kaayo. hahaha gitsek nako sa internet siya nga brand. ang mga woodworker kay dili daw sila ganahan kay pang home use ra siya daw. mas maayo jud if kadto mga ilado nalang.

[waterboy0911]

Ryobi na jigsaw
Ma palit sa mga surplusan
Ang uban mapalit sa prendahanan

[blotot]

Ryobi na jigsaw
Ma palit sa mga surplusan
Ang uban mapalit sa prendahanan

Bro are you talking sa cebu area ni or manila?

[maghago]

Nag project study ko ug buhat ug modular furnitures bro, akong tan-aw kamao ko ani, most delicate part kay precision cutting ug edge banding ani, basta sakto lang ug kahibawo mo buhat ug jig/fixtures sakto sa clamps okay ra kaayo.. mao ni ako rong gitan-aw bro... ad2 palit sa gawas sa trimmer brod kon naa kay relative did2 kay barato ra tingali ni..

@ waterboy Daghang Salamat for your valuable inputs dako kaayo nig matabang namong mga beginner...

[blotot]

@ waterboy

Bro ask lang ko nimo in your personal opinion.

Plan ko to buy a cut off saw 14 inch/ 2300 watts...this is for my metal projects...

ako concern BRO is ako pod unta ni gamiton to cut wood like 2x2 for my wood projects...using a circular saw blade...

whats your opinion?

[waterboy0911]

Bro are you talking sa cebu area ni or manila?

sa davao na bro. But before naa ko nakita sa binglens ug sa jeroms sa sanchangko