make your wi-fi router to 3G router

[backstabbd88]

---

bro pwede rani dual wan nga WIMAX + WIMAX (Globe)?...

[ambet2000]

read mo ito


ill be making a short tutorial for the benefits of ka SB

RIGHT NOW WIMAX 1mb+3G GANTIMPALA SIM

downloading average 150-200kb/sec sa IDM hehe
d ko pa natry pag madaling araw itestdrive

MATUTUWA KYO SA TOMATO ROUTER
1. DUAL WAN
2. LOAD BALANCING
3. BITTORRENT = kht alang PC pede torrent
4. SAMBA file sharing
5. WIFI
6. DSL ROUTER



lets START
needed items

WARNING: HINDI PO GAGANA UNG FIRMWARE NA NASA LINK KO DUN SA TIG 1380 NA BINEBENTA NA BAGO NG CDRKING.

1. Cheapest Router with loadbalancing of 2WAN Tomato Flashed
only 1580
CDrking CW-5354U <===click here

2. Wimax and wimax or wimax and 3g broadband usb

AFTER BUYING THE ROUTER We need to Flashed it to DUAL WAN tomato firmware
DOWNLOAD THE FIRMWARE <====


after flashing it with the new firmware its now a DUALWAN capable loadbalancing router SO CHEAP

PROBLEM 1 = TOMATO ROUTER has same router IP with WImax 192.168.1.1 so theres a conflict we need to change the Tomato Router ip address to 192.168.2.1

SET YOUR DEFAULT IP ADDRESSES

WIMAX1 = 192.168.1.1
WIMAX2 = 192.168.3.1
ROUTER = 192.168.2.1

problem1 SOLVED

PROBLEM 2 = EACH router Has 2 DHCP SERVER again this is CONFLICT so we need to disable the DHCP server of TOMATO ROUTER

Problem 2 SOLVED

PROBLEM 3 = ENABLED THE USB SUPPORT FOR 3G
SELECT USB AND NAS- CHECK THE USB CORE SUPPORT


FLASHING THE TOMATOR ROUTER TO ENABLE DUAL WAN

1.Now plug the TOMATO ROUTER to your computer
put the UTP cable to the back port of your CPU then at the Tomato router LAN1-LAN4 port any port will work

note this is the 1st tym to config the router
2. GO TO YOUR BROWSER TYPE 192.168.1.1
username: admin password:admin

3.select ADMINISTION - UPGRADE
ok now select the TOMATO FLASH DUALWAN that we downloaded
then click ok


CONFIGURING THE TOMATO ROUTER

1.Now plug the TOMATO ROUTER to your computer
put the UTP cable to the back port of your CPU then at the Tomato router LAN1-LAN4 port any port will work

2. GO TO YOUR BROWSER TYPE 192.168.1.1
username: admin password:admin

3. GO to BASIC-NETWORK

SETUP for WIMAX+WIMAX

WAN1 - SELECT DHCP - put it in at INTERNET PORT of tomato router wimax1
WAN2 - SELECT DHCP - put it in LAN4 port of tomato router wimax 2


Under "LAN"
uncheck DHCP server
change IP address to 192.168.2.1

at the bottom click SAVE

SETUP for WIMAX+3G USB

WAN1 - SELECT DHCP - put it in at INTERNET PORT of tomato router wimax1
WAN2 - 3G - put the 3g broadband at the USB slot port of the tomato router

config the 3g
DIAL NUMBER - *99#
APN - http.globe.com.ph
modem port - 0

Under "LAN"
uncheck DHCP server
change IP address to 192.168.2.1

at the bottom click SAVE

CONFIGURING LAN ADAPTER OF PC TO STATIC IP
IPaddress 192.168.2.XX XX=2-255
default gateway - 192.168.2.1

DNS gateway - 192.168.2.1

NOTE: if you want to access the GUI of your tomato router
you need to type 192.168.2.1 after the configuration

and for wimax 192.168.1.1 still the same

finish sensya mablisan lang para magkaidea kyo

Status


heto SS

[ambet2k]

wow .............................................

[kitloy]

dualwan na firmware ang available ani nga unit

pwede nimo sa WAN your enternet connection nya sa wan2 USB port 3g modems
f dli usb imong wan2 adto e plug sa lan4 for wan2 for WIMAX or entrenet connection pldt or globe

aguy nahan ko ani bro..
naa ko pldt + wimax + Globe Tattoo , pwede diay sila dunganon tulo?
pa PM ko bro...nahan ko mag aquire sa imo service hehehe

regards,

[ambet2000]

only works on CDrking CW-5354U pero rare na kaayo na sa mga cdrking branch

[ambet2000]

ato esaka dogay najud ni na lubong

[ambet2000]

upppppppppppppppppppp