Show Us Your Rig v1524.79

[EarlZ]

---

@lloyd_joy

Boss, pila temps anang top card? kay morag huot gyud kaayo! nice rig!

[lloyd_joy]

@ bai earl,

thanks...

mao lagi, huot kaayo tan-awon. gamay na lang kaayo ang gap nila kay nag occupy man lagi'g 3 slots per card. pero, the design eng'rs at inno3D had made and completed their job with "flying colors". mao ni ang result sa pag burn-in nako nya gabi-i for 4 hrs using MSI Kombustor... set my room temp at 25 Deg C... stabilized it for 1 hr... then start the GPU testing.

Case Fan Set-up:
> 2x120 mm top exhaust fans rotating at 1250 rpm max
> 2x120 mm radiator exhaust fans (push-pull) rotating at 2350 rpm max
> 1x120 mm front intake fan rotating at 1650 rpm max


Test: Furry & Tessy Test (GL4)... MSI Kombustor

Fan speed : Fixed at 40%
Max GPU temp:
> GPU 0: 71 Deg C
> GPU 1: 24 Deg C

Max GPU load:
> GPU 0: 99%
> GPU 1: 1%

Max Power:
> GPU 0: 92% TPD
> GPU 1: 9% TPD




Fan speed : Fixed at 80%
Max GPU temp:
> GPU 0: 58 Deg C
> GPU 1: 24 Deg C

Max GPU load:
> GPU 0: 99%
> GPU 1: 1%

Max Power:
> GPU 0: 95% TPD
> GPU 1: 12% TPD



check nko tonight ang GPU temps during actual gaming...

[dark_humbz]

ayay dyosep naa man kay troll...ahaha

hahahahaha, di man na troll cya boss vin, fanbase ko na... hahahahaha! :P

[ruben17]

here's mine for today... in SLI... Inno3D GTX 660 Ti iChiLL Dragon Edition...







pwerte ka huot... hehehe... but the GPUs stood their name as iChiLLs... had OC'ed them... core freq @ 1038 MHz (1116 MHz boost) and mem freq @ 6256 MHz ... they are really runnin' cool... i'll further check their temp again & again...

sigo gyud diay..... gratz

[crisxahia]

brad, pwede mangutana diin ka ni palit sa mboard nimo? pilay damage sad?

My share..






Processor: Intel i5 2500k Oc`ed to 4.4 Mhz
Motherboard: Asrock Z77 Extreme 4
Cooler: Antec H2O 620
Memory: Corsair vengeance 1600 2x4gb kit
Video Card: ASUS GTX 660Ti
Chassis: CM Storm Enforcer
Power Supply: Silverstone 600 watts, modular
SSD: OCZ Vertex 3 120gb
HDD: 500gb Seagate
HDD: 320gb Western Digital
Keyboard: CM Quickfire Pro Mechanical Keyboard
Mouse: Roccat Kova
Mouse Pad: Roccat Sense/CM Speed-RXL
Headset: Roccat Kave 5.1 Surround
Monitor: LG IPS234V LED
Speakers: Altec Lansing 2.1

[lloyd_joy]

sigo gyud diay..... gratz

sulod ra sya bro... thanks...

[mike1293]

brad, pwede mangutana diin ka ni palit sa mboard nimo? pilay damage sad?

Insotec boss murag 7k na lang ni.

Pm Sky89 for inquiries.

[mudstaticz]

ayaw tawn ninyu e qoute tanan pix uy kay kapoy kaaug scroll down...

[acronis]

@lloyd joy

mura lage ni bend imo top gpu card.... hehe..

[lloyd_joy]

@lloyd joy

mura lage ni bend imo top gpu card.... hehe..

sakto gyud ka bro... bend ang Aluminum heat sink fins sa isa... ang dapit sa luyo... humok man kaayo na part gud na... basin na grabehan ang torque pag pa hugot did2 sa manufacturing line... pero, wala ra man problema... after nadawat ni nko sya (mao man ni ang 1st purchase nako) kita ko ani nya na bend... gi burn-in ni nako sa Kombustor ug 1 week straight unya gi OC pa gyud nko para stressed sya... para kun naa'y probs ang GPU chip, like affected sya sa mechanical impact, makit-an dayon kay mo fail man sya then ma uli... hehehe... so far, so good man sya. naa'y 1 yr warranty sa shop then 3 yrs warranty sa inno3D...

by the way, ang PCB nya kay straight ra... naa man sya rails for support...