
Originally Posted by
lloyd_joy
this will not hold true all the time... discrete GPUs that will suck power from the PCIe slot "only", a generic PSU will do... as long as dili pud power sucker ang CPU na gamiton... like anang mga 125 W or 220 W CPUs... ok ra ning mga generic PSU basta, dili lang overload sila on their DC load... ug, clean pud ang input from the wall...
a GTX 750 Ti (w/out the 6 pin PCIe power connector) will just run fine on a 500 W generic PSU... actual wattage ani nila kay naa ra sa mga 250 ~ 350 W... then ang amperage rating on the +12V rails would be 16 amps...
ang golden rule kay mao ni... if your line from the wall is too noisy, it is a must to install power protection devices... you all know what I mean... walay labot ani ang mga baratohon na electronic AVRs na wla'y gamit... puno2x lang na sila's electricity bill... ehehehe...
daghan generic PSUs na will outlast their "branded" counterparts... nila sa balay sa akoang parents, their last generic PSU runs for almost 10 yrs. gi pa ilisan lang nko kay wla na mo function ang exhaust fan... akoang gipalitan then gi pa ilisan nila'g Huntkey Jumper350 (80+ Bronze) pero, igo ra sya nag 2 yrs+ ang Jumper350 then unstable na ang output nya w/c in turn resulted to an unstable rig... this is just a classic example vs a known brand and a generic PSU in my own personal experience...
by the way, the same ra sila'g DC load (installed HW on the rig)... ang Huntkey diay kay gi ilisan ug generic PSU napud... PSU na dala sa chassis (palit nko sa Gaisano Interpace atbang sa SM 2 yrs ago)... the rig is currently running fine... tua na ni's cousin nko kay akoa man gipahatag did2... sige lang duwa-an ug Dota/Dota 2... current GPU kay Maxsun (Palit) GT 630 1GB DDR3... previous one was Maxsun (Palit) GT 240 512MB DDR3... CPU: E6600 (Pentium Dual Core 3.06 GHz) w/ 4 MB DDR3 ram 1066 MHz, WD caviar blue 160 GB (7200 rpm) and an Asus mobo (limot ko's model)...
basta, depende ra gyud sa DC load or components na gamiton ang PSU... kita na ang mo pili kun unsa ang swak sa budget ug unsa pud ang relax ang atoang utok... kasagaran ani, dako ni'g ma shell out kay patuyang lang ug gasto. overkill ang components or PSU na paliton. this is funny but true...
how would I know the wattage of my CPu and If they are over load on DC load? i dont even know whats DC load bdw

hehe
how would I also know if my input from the wall is clean?