OC experts help me! :D

[keropi]

---

Pwede ra man iadjust daan ng Vdimm. First, try cl8, test, if ok, try cl7. When you've found the tightest cl possible, just try lowering the trcd but i bet 9 is the lowest it would get. Do the same with trp and tras. Hopefully it would run stable @ 7-9-7-24. But then every chip is different from the others. Other GSkill chips dont scale well with voltage above 1.6v like my ECO and Sniper..

[jOnyx]

mga bossing, ask sad ko ram timing sa 6-6-6-18, Q8200 @ 2.9ghz, 1.144 Core voltage...ok raba ni sya?

[werty]

mga bossing, ask sad ko ram timing sa 6-6-6-18, Q8200 @ 2.9ghz, 1.144 Core voltage...ok raba ni sya?

if ur mem timings and processor speed and voltage was derived from a slow but steady step by step tests and appeared stable, then its OK...

if u just skipped to those values w/o any testing, then di na sya ok...

[jOnyx]

Boosing werty maaung buntag, actually brad ako ning g.padaganan ug prime for almost 5 hours and no errors man sad..dugay dugay sad nako nakuha ang 2.9 sa kani nga proc tungod sa iyang low multiplier..matsalams sa info mga brad.

[sioti49]

mga bro, i tried 8-9-8-24 last night with 1.59v tested prime95 from 2am to 9am all well
i will try to lower my timings pa later... ill let you know.

maybe i will need to raised my voltage again.

and another concern... dili ba ma stress akong psu? silverstone 500w essenstial, kay nag unlock nako sa akong procei ga overclock pako nya nag up sa voltage, then mag up napud ko voltage sa akong ram.

after sa ram i will try to overclock my asus 5770 cu core.

[cesar_jr12]

Pwede ra man iadjust daan ng Vdimm. First, try cl8, test, if ok, try cl7. When you've found the tightest cl possible, just try lowering the trcd but i bet 9 is the lowest it would get. Do the same with trp and tras. Hopefully it would run stable @ 7-9-7-24. But then every chip is different from the others. Other GSkill chips dont scale well with voltage above 1.6v like my ECO and Sniper..

mao gyud ni ako gnahan ni keropi basta upgrade, aw lage update dayon... hehehe
keep up nice work boss...

up ko ani....

[eXpLoDe]

TS: update nya kung na unsa na imong pag OC.

[keropi]

and another concern... dili ba ma stress akong psu? silverstone 500w essenstial, kay nag unlock nako sa akong procei ga overclock pako nya nag up sa voltage, then mag up napud ko voltage sa akong ram.

One review of a HyperX LV rated @ 1.35v finds out a difference of only 5w over the standard 1.5v stick..

[balipseyev]

mga bro, i tried 8-9-8-24 last night with 1.59v tested prime95 from 2am to 9am all well
i will try to lower my timings pa later... ill let you know.

maybe i will need to raised my voltage again.

and another concern... dili ba ma stress akong psu? silverstone 500w essenstial, kay nag unlock nako sa akong procei ga overclock pako nya nag up sa voltage, then mag up napud ko voltage sa akong ram.

after sa ram i will try to overclock my asus 5770 cu core.

Kaya ra na sa 500W na silverstone.....

Wala pa noon ko kasulay OC ug VC.... Pde pa ba ma reset ang VC after i OC?

[keropi]

Pde pa ba ma reset ang VC after i OC?

Pwede ra kaayo. You may OC your VC via software such as Rivatuner and Afterburner or via editing the clocks in the bios or flashing to a preconfigured bios. Both methods can be undone anytime..