How to configure Xyzel Router?

[lonelyboys]

---

Naa nay username ug pass..ang naa sa above akoa lang gi erase ang username..

[SmaRkieS]

Maybe this thread can help.

You can use my config file from my Zyxel P-660R-D1, bali 4 ka pc naka connect ani, only using the CDRking Switch.


save this picture to your desktop and open with winrar.



and extract that file to you mydocuments.

So heres what you need to do.

- set your PC IP to 192.168.1.33, subnet mask 255.255.255.0

- open your internet browser and type this address 192.168.1.1

Welcome to your router Configuration InterfaceEnter your password and press enter or click "Login"

password: 1234

Use this screen to change the password.


Your router is currently using the default password. To protect your network from unauthorized users we suggest you change your password at this time.

click ignore

Please select Wizard or Advanced mode


The Wizard setup walks you through the most common configuration settings.

click Go to Advanced setup

- click maintenance
-------- click tools

click configuration tab

Restore Configuration

To restore a previously saved configuration file on your computer to the router, please type a location for storing the configuration file or click Browse to look for one, and then click Upload.

click browse, then katong file nga gi pa extract nako nimo sa mydoc file name: rom-0-Dual User (meaning multiple user)

click upload

the router will configure it self.

The Router Is Rebooting Now. Please Wait ... The router will now reboot.
As there will be no indication of when the process is complete, please wait for one minute before attempting to access the router again.

wait maka restart siya.

then login balik...

- input pass
- ignore new pass

- pero dire sa wizard click Go to Wizard setup
- click INTERNET SETUP

Connection Test in Progress

Please wait a moment.

about 7 Seconds

- click next after detecting ISP.

then mao na dayo ni mo gawas.

Congratulations The Internet Setup configuration is complete. Here is your current settings.

Internet Settings

Mode: Routing
Encapsulation: ENET ENCAP
Multiplexing: LLC
VPI/VCI: 0/100

inig balik nimo sa main page mao pani ang status

WAN Information
- DSL Mode: ADSL2+ Mode
- IP Address: 0.0.0.0
- IP Subnet Mask: 0.0.0.0
- Default Gateway: N/A
- VPI/VCI: 0/100

Turn off your Zyxel.. after 10 secs e on balik.. mag blink pana ang Green, then Orange, then ang 3rd Green.

3rd Green nga light mag sige na blink till mo siga ang 4th Green..

Then balik login sa 192.168.1.1

then click Advance

then the status will be like this.

WAN Information
- DSL Mode: ADSL2+ Mode
- IP Address: 112.202.56.47
- IP Subnet Mask: 255.255.128.0
- Default Gateway: 112.202.0.1
- VPI/VCI: 0/100

Now back to your Lan settings and set the TCP/IP to obtain ip auto, and obtain dns auto. Dayon kana nga Pc ang IP ana is 192.168.1.101 the rest is 102, 103, etc.

Post lang nya dire if naa pa blema.



https://www.istorya.net/forums/networ...em-router.html

[lonelyboys]

Dako pa jud kaayo blema..F mag configure ka using PPoe bro...unsaon man jud ug pag configure nga sakto..duda ko ani sayop jud ni pagconfigure nako

[Htennek]

d diay gihapon maka connect if katong ENET ENCAP imo gamiton? unsa man jud dai na nga plan imoha? murag wa paman ko ka kitag nay ga PPoE diri sa cebu, i mean wa pako kabantay. hehe

[lonelyboys]

naa daghan oi...basta internet cafe...para maka use ka username ug password...

[lonelyboys]

naa daghan oi..basta i-cafe...karon pa man sad gud ko naka configure ani na router. dli man gud ko maka use sa ENET ENCAP..kay gitagaan man gud ko ug username ug password para maka connect sa PLDT provider man cguro na..

[Htennek]

ahh ic. hehe. sa amo office pldt dsl man sad gud then more than 30 naka connect. pero ENET ENCAP amo. way username/pass na. wa ko kahibaw ana configuration sa PPoE. up nalang ni para kita ang uban. heehee

[lonelyboys]

@ Htennek: Thanks for ur reply bro...