Originally Posted by
netcommando
ing-ania pag config:
pldt dsl modem: config modem as router, lan ip 192.168.1.1 255.255.255.0
globe dsl modem: config modem as router, lan ip 192.168.1.2 255.255.255.0
connect eth cable from each dsl modem to switch
connect also eth cable from pc to switch
pc lan config for pldt: ip add 192.168.1.3
mask 255.255.255.0
gateway 192.168.1.1
dns pri 192.168.1.1
pc lan config for globe: ip add 192.168.1.4
mask 255.255.255.0
gateway 192.168.1.2
dns pri 192.168.1.2
Ok pud ni na suggestion. but if you dont want to change any settings sa imo na router/modem provided by globe or pldt, u can change the LAN IP of each computer(of course mag add ka additional lancard for each pc) like:
192.168.2.2(PLDT) and
192.168.2.3(Globe),
subnet:255.255.255.0
and gateway @192.168.2.1
and connect both computers using a crossover cable. no need a HUB/Switch if u are not planning to connect more than 2 computers.
Hope this help. pls respond back if this works...