Fibre glass reinforced, 1 1/4" cut off wheels/disc for dremel/rotary tools 10pcs for 250php

[alwaysdrunk]

---

good evening, see that 3296 trimpot? the blue square shape with a little brass nut on top. you adjust from there to your desired voltage output. no need to program. it's just a step down voltage converter. it would be advisable to have a voltmeter to monitor the desired output voltage you like.

sorry, i don't know what's that BEC your referring to.

UBEC may tawag ana sa taga RC car/plane . di ko kamao explain unsa gyud na sya pero iya function sa ako pagsabot is mo step down sa output voltage like if input is bisan pila na volts the iya e-out is fixed 6v depende sa model. ako unta gamiton pag power sa 12 ka servo , naa man koy NimH battery kaso 8.4V sya nya ako servo is 6V ra ang operating voltage mao ako unta e-step down kay mo hagtos daw ang servo @ more than its operating voltage...

[titaniumbox]

ah ok. researched about that UBEC. yupz, its basically the same principle. smps power supply, switch mode. but considering the number of servo motors your powering up. 12 kabuok. that's so much power involved. pila ka mA or A per servo motor? times 12. you would need a higher power rating step down converter/UBEC to power up your 12 servos.

kani ay, barato ra.. https://www.hobbyking.com/hobbyking/...Reduction.html

pero murag kulang pa siguro nang 3A rating pra sa imo 12 servos..

[titaniumbox]

New BH1750FVI Digital Light intensity Sensor Module For Arduino 3V-5V power at 475.00php

Description:
Chip : BH1750FVI
Power supply: 3v-5V power
Light range ：0-65535 lx
Sensor built-in : 16 bit AD converter
Direct digital output, bypassing the complex calculation, bypassing the calibration
Don't distinguish between ambient light
Close to the spectral characteristics of visual acuity
widely use to 1-lux high precision measurement
Standard NXP IIC communication agreement

Package:
1 PCS X BH1750FVI Digital Light intensity Sensor Module For Arduino

Spoiler! 

[alwaysdrunk]

Mao lagi boss cge pko research 5000mah man ako battery 8.4v nya need nko e-step down. Thanks boss

[titaniumbox]

Mao lagi boss cge pko research 5000mah man ako battery 8.4v nya need nko e-step down. Thanks boss

good luck! your welcome!


2 Channels 3W Digital power PAM8403 Class D Audio Amplifier Board USB DC 5V at 300.00php

((((((SOLD OUT))))))

Item Description:
1. Advanced Micro Devices, volume: 1.85 * 2.11cm
2. Excellent noise suppression in the case is not connected to the input audio, the ear close to the speaker cannot hear any noise
3. Two-channel stereo, 5V power supply can output 3W +3 W power, can directly drive 4Ω 8Ω small speaker output power, full of energy, good sound quality.
4. Unique without LC filter Class D digital power board, and can be used directly to the computer's USB powered.
5. Dual-panel wiring, properly solve the crosstalk between the ground potential balance and channel wiring
6. Ultra-miniature design, can easily be placed in the internal space for a variety of digital products, ultra high zoom efficiency.
7. All using the machine for the entire board soldering, hand soldering iron welding quality comparable!
8. Rated working voltage 2.5-5V, limit operating voltage 5.5V.

Note: The left and right channel output of the "negative" cannot be together, otherwise it will burn the IC and energized speaker (load) connected before.

Shipping List:
1PCS*2 Channels 3W PAM8403 Class D Audio Amplifier Board

Spoiler! 

[MangLando]

Bsin naa kai ing ani boss. https://www.sparkfun.com/products/12710 . Ganahan tako mupalit ani. Murag daghan pud ganahan palit ani ai. Aheheh

[titaniumbox]

Bsin naa kai ing ani boss. https://www.sparkfun.com/products/12710 . Ganahan tako mupalit ani. Murag daghan pud ganahan palit ani ai. Aheheh

hello, good morning MangLando! sorry, i don't have that. bitaw, nice xa.. unique..haha! can't find that anywhere.. ka daghang mga request new na items from buyers.. hehe.. walay kahumanan.. lolz!

also, i saw you were looking for rs232 to ttl converter, i have one.. also can't pm you back coz your inbox is always full. i do have that voltemeter you mentioned, but not for sale.. mine, mine mine! hahaha! 0-100v and 2.5v-30v =)

[titaniumbox]

28BYJ-48 Valve Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction For Arduino at 250.00php

Item Description:
Brand new and high quality.
Diameter: 27mm.
Voltage: 5V.
Step angle: 5.625 x 1/64.
Reduction ratio: 1/64.
5 lines cable 4 phase stepper motor can be driven by ULN2003 chip.
It also can be connected as 2 phase to use
Original box: No
Color: Silver
Item size: 31*27*19mm
Net weight: 35g

Package:
1PCS X 28BYJ-48 Stepper Motor

Spoiler! 

[titaniumbox]

Photoresistance Detection Optical Photosensitive light sensor module for Arduino at 400.00php

Item Description:
Comparator chip LM393 ,it is stable.
Can detect the ambient brightness and light intensity
Accuracy adjustable
Operating voltage 3.3V-5V
Output: DO digital switch outputs (0 and 1) AO analog voltage output
power indicator and digital switch output indicator
With a mounting screw hole
PCB size: 3.1cm * 1.5cm
Interface Description (4-wire):

1 VCC -- 3.3V-5V voltage
2 GND -- GND
3 DO -- board digital output interface (0 and 1)
4 AO -- board analog output interface

Introduction:
This module is sensitive to the light, Usually used for detecting the ambient brightness and light intensity.
When there is no light or the light intensity cannot reach the value, DO output is high level. When light intensity over than the value, the module DO output is low level.
The module digital output DO can be directly connected with the microcontroller, use microcontroller detect high or low level, so that can detect the environmental light intensity change.
Can use this board digital output DO port drive relay module directly(our store on sale these relay modules), can use as a photoelectric switch.
The analog output AO connect with AD module, it can get more precise light intensity value through the AD converter.

Package Includes:
1* Photosensitive light sensor module

Spoiler! 

[titaniumbox]

ATTINY85-20PU, 8 bit AVR Microcontroller 20MHz 8kb Flash, 512B RAM, I2C SPI 8-Pin PDIP at 150.00php

Specifications:
ADC Channels: 4
ADC Resolution: 10bit
ADCs: 4 x 10 bit
Data Bus Width: 8bit
Device Core: AVR
Dimensions: 0.4 x 0.28 x 0.195in
Family Name: ATtiny
Height: 0.195in
Instruction Set Architecture: RISC
Length: 0.4in
Maximum Frequency: 20MHz
Maximum Number of CAN Channels: 0
Maximum Number of Ethernet Channels: 0
Maximum Number of I2C Channels: 1
Maximum Number of LIN Channels: 0
Maximum Number of PCI Channels: 0
Maximum Number of SPI Channels: 1
Maximum Number of UART Channels: 1
Maximum Number of USART Channels: 0
Maximum Operating Temperature: +85 °C
Minimum Operating Temperature: -40 °C
Mounting Type: Through Hole
Number of ADC Units: 1
Number of PWM Units: 1
Number of Timers: 2
Package Type: PDIP
Pin Count: 8
Program Memory Size: 512 B, 8 kB
Program Memory Type: Flash
Pulse Width Modulation: 6 x 8 bit
PWM Channels: 6
PWM Resolution: 8bit
RAM Size: 512 B
Timer Resolution: 8bit
Timers: 2 x 8 bit
Typical Operating Supply Voltage: 2.7 ? 5.5 V
USB Channels: 0
Width: 0.28in

ATtiny25-45-85_DataSheet

Spoiler!