Fibre glass reinforced, 1 1/4" cut off wheels/disc for dremel/rotary tools 10pcs for 250php

[titaniumbox]

---

5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase at 325.00php

Item Description:
Brand new and high quality
Voltage: 5V
Diameter: 28mm
Step angle: 5.625 x 1 / 64
Reduction ratio: 1 / 64
5 Line 4 phase can be driven by ordinary uln2003 chip can also be connected in phase 2
development board used for.
supporting the use of a direct plug and easy to use stepper motor used in the development board.
Stepper motor driver board with ULN2003
A, B, C, D four-phase LED indicates the status of the stepper motor work
Stepper motor with a standard interface, when used directly pluggable
Original box: NO
Length: 274mm
Net weight: 43g

Package:
1 x Drive Module Board ULN2003
1 x Stepper motor 28BYJ-48

Spoiler! 

[titaniumbox]

NEW CP2102 USB 2.0 to UART TTL 6PIN Module Serial Converter

Specification:
This is a USB 2.0 to TTL UART 6PIN CP2102 Module Serial Converter. Connect MCU easily to your computer!
Stable and reliable chipset CP2102
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector. 6pins for 3.3V, RST, TXD, RXD, GND & 5V.
All handshaking and modem interface signals.
Baud rates: 300 bps to 1.5 Mbps.
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range: -40 to +85.
Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40.

Package:
1PCS*New design CP2102.
4PCS*Dupont cables.

Spoiler! 

[titaniumbox]

5V 10A one 1 Channel Relay Module With optocoupler For PIC AVR DSP ARM Arduino

Specification:
This is a 5V 1-Channel Relay interface board, be able to control various appliances, and other equipment with large current. It can be controlled directly by Micro-controller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

5V 1-Channel Relay interface board, and each one needs 15-20mA Driver Current
Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic
Equipped with high-current relay, AC250V 10A ; DC30V 10A
Indication LEDs for Relay output status
Equipped with screw holes for easy installation
5V 1-Channel Relay interface board, and each one needs 15-20mA Driver Current.
Equiped with high-current relay, AC250V 10A ; DC30V 10A.
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
Indication LED’s for Relay output status.

Features:
Size:53mm*28.3mm*19.3mm
net wieght : 18g
PCB color: black
With 4 fixed screw holes , hole diameter 3.1mm, convenient installation and fixation

Package Included:
1PCS*5V Eight 1 Channel Relay Module For PIC AVR DSP ARM Arduino

Spoiler! 

[titaniumbox]

DS3231 AT24C32 IIC precision Real time clock module memory module Arduino at 475.00php

Specification:
DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. The device incorporates a battery input, disconnect the main power supply and maintains accurate timekeeping. Integrated oscillator improve long-term accuracy of the device and reduces the number of components of the production line. The DS3231 is available in commercial and industrial temperature ranges, using a 16-pin 300mil SO package.
RTC maintains seconds, minutes, hours, day, date, month, and year information. Less than 31 days of the month, the end date will be automatically adjusted, including corrections for leap year. The clock operates in either the 24 hours or band / AM / PM indication of the 12-hour format. Provides two configurable alarm clock and a calendar can be set to a square wave output. Address and data are transferred serially through an I2C bidirectional bus.
A precision temperature-compensated voltage reference and comparator circuit monitors the status of VCC to detect power failures, provide a reset output, and if necessary, automatically switch to the backup power supply. In addition, / RST pin is monitored as generating μP reset manually.
Save time and high precision addition, DS3231 also has some other features that extend the system host of additional features and a range of options. The device integrates a very precise digital temperature sensor, through the I2C * interface to access it (as the same time). This temperature sensor accuracy is ± 3 ° C. On-chip power supply control circuit can automatically detect and manage the main and standby power (i.e., low-voltage battery) to switch between the power supply. If the main power failure, the device can continue to provide accurate timing and temperature, performance is not affected. When the main power re-power or voltage value returns to within the allowable range, the on-chip reset function can be used to restart the system microprocessor.

Module parameters:
1. Size: 38mm (length) * 22mm (W) * 14mm (height)
2. Weight: 8g
3. Operating voltage :3.3 - 5 .5 V
4. Clock chip: high-precision clock chip DS3231
5. Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute
6. Calendar alarm clock with two
7. Programmable square-wave output
8. Real time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation
9. Chip temperature sensor comes with an accuracy of ± 3 ℃
10. memory chips: AT24C32 (storage capacity 32K)
11. IIC bus interface, the maximum transmission speed of 400KHz (working voltage of 5V)
12. Can be cascaded with other IIC device, 24C32 addresses can be shorted A0/A1/A2 modify default address is 0x57
13. With rechargeable battery LIR2032, to ensure the system after power failure, the clock move any natural normal
14. Packing: single anti-static packaging
Wiring instructions (with Arduino uno r3 for example):
SCL → A5
SDA → A4
VCC → 5V
GND → GND

Package Content:
1*DS3231 module

Note: battery not included

Spoiler! 

[titaniumbox]

5V Two 2 Channel Relay Module With optocoupler For PIC AVR DSP ARM Arduino

Specification:
This is a 2 Channel 5V Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .

1. 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
2. Equiped with high-current relay, AC250V 10A ; DC30V 10A
3. Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

Package Included:
1PCS*5V Eight 2 Channel Relay Module For PIC AVR DSP ARM Arduino

Spoiler! 

[titaniumbox]

USBASP USBISP AVR Programmer USB+10 Pin Convert to Standard 6Pin Adapter Board at 525.00php

USBASP:

This programmer is based on Thomas Fischl's USBasp design and connects to your computer's USB port. Not only is it quite compact, but the design is really elegent. The USB interface is achieved by using an atmega processor and the rest is done in firmware. For those interested, the firmware source code can be downloaded from the USBasp website.

USBasp - USB programmer for Atmel AVR controllers - fischl.de

Some of the features include:

Support for AVRDude from version 5.2 onwards
Allows you to to read or write the microcontroller EEPROM, firmware, fuse bits and lock bits
Support for Linux, Mac OS X and Windows (will work on vista)
5 KB/sec maximum write speed
Software controlled SCK option to support targets with low clock speed (< 1.5MHz)
10 pin ISP interface
These programmers are a perfect companion to the Protostack 28 pin AVR Development Board or the Protostack ATMEGA8 Development Kit.

Supported microcontrollers include:

Mega Series
ATmega8 ATmega48 ATmega88 ATmega168 ATmega328
ATmega103 ATmega128 ATmega1280 ATmega1281 ATmega16
ATmega161 ATmega162 ATmega163 ATmega164 ATmega169
ATmega2560 ATmega2561 ATmega32 ATmega324 ATmega329
ATmega3290 ATmega64 ATmega640 ATmega644 ATmega649
ATmega6490 ATmega8515 ATmega8535
Tiny Series
ATtiny12 ATtiny13 ATtiny15 ATtiny25 ATtiny26
ATtiny45 ATtiny85 ATtiny2313
Classic Series
AT90S1200 AT90S2313 AT90S2333 AT90S2343 AT90S4414
AT90S4433 AT90S4434 AT90S8515AT90S8535
CAN Series
AT90CAN128
PWM Series
AT90PWM2 AT90PWM3


10 Pin Convert to Standard 6 Pin Adapter Board :
Photobucket
1. Features
2. ATMEL ISP standard 10PIN convert to standard 6PIN interface
3. 10PIN to 6PIN ISP Adapter board × 1

Package:
1 X Black USBASP
1 X 10 pin cable
1 X 10PIN to 6PIN ISP Adapter board

Spoiler! 

[titaniumbox]

5V Four 4 Channel Relay Module With optocoupler For PIC AVR DSP ARM Arduino 8051

Specification:
5V Relay Module 4-Channel
This is a 5V 4-Channel Relay interface board.
Be able to control various appliances, and other equipments with large current.
It can be controlled directly by Micro-controller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current.
Equipped with high-current relay, AC250V 10A ; DC30V 10A.
Indication LED’s for Relay output status.

Application:
Supports all MCU control.
The industrial field.
PLC control.
Smart home control.

Package Included:
1PCS*5V Eight 4 Channel Relay Module For PIC AVR DSP ARM Arduino

Spoiler! 

[titaniumbox]

USB PIC Automatic Programming Develop Microcontroller Programmer K150 ICSP


Item Description:
Support the most popular programming PIC chips, read, encryption and other features!
No external power supply, communication and power is only a USB cable to print complete, without any cable.
PICSTARTPLUS much faster rate than programming.
Can easily read the contents of the chip program area.
Automatic programming verification.
Comprehensive information prompts, allowing users to understand the working state.
With 40pin ZIF programming of the seat, can be directly programmed in 8-pin to 40 pin PIC microcontroller chip can be programmed Using ICSP online or add conversion blocks.
8 pin 40 pin-board outside the chip can be downloaded directly online ICSP output.
Compatible with Windows98 and Windows2000/NT, Windows XP / Windows 7 and other operating systems.

PIC MCU models support:
10 Series:
PIC10F200 * PIC10F202 * PIC10F204 * PIC10F206 *
PIC10F220 * PIC10F222 *

12C Series:
PIC12C508 PIC12C508A PIC12C509 PIC12C509A
PIC12C671 PIC12C672 PIC12CE518 PIC12CE519
PIC12CE673 PIC12CE674

12F Series:
PIC12F508 PIC12F509 PIC12F629 PIC12F635
PIC12F675 PIC12F683

16C Series:
PIC16C505 PIC16C554 PIC16C558 PIC16C61
PIC16C62 PIC16C62A PIC16C62B PIC16C63
PIC16C63A PIC 16C64 PIC16C64A PIC16C65
PIC16C65A PIC16C65B PIC16C66 PIC16C66A
PIC16C67 PIC16C620 PIC16C620A PIC16C621
PIC16C621A PIC16C622 PIC16C622A PIC16C71
PIC16C71A PIC16C72 PIC16C72A PIC16C73
PIC16C73A PIC16C73B PIC16C74 PIC16C74A
PIC16C74B PIC16C76 PIC16C77 PIC16C710
PIC16C711 PIC16C712 PIC16C716 PIC16C745
PIC16C765 PIC16C773 PIC16C774 PIC16C83
PIC16C84

16F Series:
PIC16F505 PIC16F506 PIC16F54 PIC16F57 *
PIC16F59 * PIC16F627 PIC16LF627A PIC16F627A
PIC16F628 PIC16LF628A PIC16F628A PIC16F630
PIC16F631 PIC16F631-1 PIC16F636 PIC16F636-1
PIC16F639 * PIC16F639-1 * PIC16F648A PIC16F676
PIC16F677 PIC16F677-1 PIC16F684 PIC16F685 *
PIC16F685-1 * PIC16F687 * PIC16F687 *- 1 PIC16F688
PIC16F689 * PIC16F689-1 * PIC16F690 * PIC16F690-1 *
PIC16F716 PIC16F72 PIC16F73 PIC16F74
PIC16F76 PIC16F77 PIC16F737 PIC16F747
PIC16F767 PIC16F777 PIC16F83 PIC16F84
PIC16F84A PIC16F87 PIC16F88 PIC16F818
PIC16F819 PIC16F870 PIC16F871 PIC16F872
PIC16F873 PIC16F873A PIC16LF873A PIC16F874
PIC16F874A PIC16F876 PIC16F876A PIC16F877
PIC16F877A

18 Series:
PIC18F242 PIC18F248 PIC18F252 PIC18F258 PIC18F442 PIC18F448
PIC18F452 PIC18F458 PIC18F1220 PIC18F1320 PIC18F2220 PIC18F2320
PIC18F2321 PIC18F4210 PIC18F2331 PIC18F2450 PIC18F2455 PIC18F2480
PIC18F2510 PIC18F2515 PIC18F2520 PIC18F2525 PIC18F2550 PIC18F2580
PIC18F2585 PIC18F2610 PIC18F2620 PIC18F2680 PIC18F4220 PIC18F4320
PIC18F6525 PIC18F6621 PIC18F8525 PIC18F8621 PIC18F2331 PIC18F2431
PIC18F4331 PIC18F4431 PIC18F2455 PIC18F2550 PIC18F4455 PIC18F4550
PIC18F4580 PIC18F2580 PIC18F2420 PIC18F2520 PIC18F2620 PIC18F6520
PIC18F6620 PIC18F6720 PIC18F6585 PIC18F6680 PIC18F8585 PIC18F8680

Package Include:
1x Programmer
1x High quality USB cable
1x ICSP cable
Driver download: http://www.prolific.com.tw/UserFiles...ler_v1_9_0.zip

Software download http://www.kitsrus.com/zip/DIYpack25ep.zip

Spoiler! 

[titaniumbox]

USB 2.0 to TTL UART 6PIN Module Serial Converter CP2102 STC PRGMR Free cable

Item Description:
This is a USB 2.0 to TTL UART 6PIN CP2102 Module Serial Converter. Connect MCU easily to your computer!
Stable and reliable chipset CP2102
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector. 6pins for 3.3V, RST, TXD, RXD, GND & 5V.
All handshaking and modem interface signals.
Baud rates: 300 bps to 1.5 Mbps.
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range: -40 to +85.
Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40.

Package:
1PCS*New design CP2102.
4PCS*Dupont cables.

Spoiler! 

[titaniumbox]

5V Eight 8 Channel Relay Module With optocoupler For PIC AVR DSP ARM Arduino

Specification:
100% Brand New
Size: 13.5 x 5.3 x 1.7cm (LxWxH)
Working voltage: 5V
Channel: 8 channel
This relay module is 5V active low.
It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
It is also able to control various appliances and other equipments with large current.
Relay output maximum contact is AC250V 10A and DC30V 10A.
Standard interface can be directly connected with microcontrollers.
Red working status indicator lights are conducive to the safe use.
Widely used for all MCU control, industrial sector, PLC control, smart home control.

Package Included:
1PCS*5V Eight 8 Channel Relay Module With optocoupler For PIC AVR DSP ARM Arduino

Spoiler!