Bandwidth Control for TP-WR740N

[Tahm Bhai]

---

This is what I did. I dunno if its correct. Can anyone verify? This is the Bandwidth Control part. My pc and laptop can connect now. But I am not certain if the Bandwidth control is in effect.




This is the setup on the main screen.

[networkguy]

bro try to check sa imong TP-Link GUI kung naa Bai ingon ani:

[Tahm Bhai]

wala ingon ana akong router

[networkguy]

wala ingon ana akong router

patay hehehe, kani ra nga model pa jud ang pwede sa DD-WRT firmware TP-Link TL-WR1043ND 1.1 / 1.4

[networkguy]

wala ingon ana akong router

naa bro oi check lang imo GUI then explore:

"TL-WR740N supports IP QoS function, allowing optimum utilization of bandwidth and offers bandwidth control over congestion, preventing the bandwidth abuse. In this way, the users of a small network receive committed and specific bandwidth, preventing non-critical applications from degrading network performance."


Welcome to TP-LINK

[Tahm Bhai]

Check nko ha.. asa na dapita na heading? Ang QOS part kay murag kani raman under sa BANDWIDTH CONTROL. Then naa sya options... CONTROL SETTINGS and RULES LIST. Kana akoa screenshot mao ang part sa RULES LIST.

[networkguy]

Check nko ha.. asa na dapita na heading?

explore lang ang GUI sa imo TP -Link Bro kay dili kaayo ko familiar sa interface ana and I think naa na siya sa access control

[Tahm Bhai]

Mao ni screenshot sa akong Access control. Then below nya kay RULES.



So mag modify ko sa rules ani?

Internet Access Control Rule Management Help

The Router, providing convenient and strong internet access control function, can control the internet activities of hosts in the LAN. Moreover, you can flexibly combine the Host List, Target List and Schedule to restrict the Internet surfing of these hosts.

* Enable Internet Access Control - Select the check box to enable the Internet Access Control function, so the Default Filter Rule can take effect.
* Rule Name - Here displays the name of the rule and this name is unique.
* Host - Here displays the host selected in the corresponding rule.
* Target - Here displays the target selected in the corresponding rule.
* Schedule - Here displays the schedule selected in the corresponding rule.
* Action - Here displays the action the Router takes to deal with the packets. It could be Allow or Deny. Allow means that the Router permits the packets to go through the Router. Deny means that the Router rejects the packets to go through the Router.
* Status - This field displays the status of the rule. Enabled means the rule will take effect, Disabled means the rule will not take effect.
* Modify - Here you can edit or delete an existing rule.

For example: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the LAN to access the Internet, you should follow the settings below:

1. Click the submenu Host of Access Control in the left to enter the Host List page. Add a new entry with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA.
2. Click the submenu Target of Access Control in the left to enter the Target List page. Add a new entry with the Target Description is Target_1 and Domain Name is www.google.com.
3. Click the submenu Schedule of Access Control in the left to enter the Schedule List page. Add a new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start Time is 1800 and Stop Time is 2000.
4. Click the submenu Rule of Access Control in the left to return to the Rule List page. Select Enable Internet Access Control and choose "Deny the packets not specified by any internet access control rule to pass through the Router".
5. Click Add New... button to add a new rule as follows:



* In Rule Name field, create a name for the rule. Note that this name should be unique, for example Rule_1.
* In Host field, select Host_1.
* In Target field, select Target_1.
* In Schedule field, select Schedule_1.
* In Action field, select Allow.
* In Status field, select Enable.
* Click Save to complete the settings.

[networkguy]

Mao ni screenshot sa akong Access control. Then below nya kay RULES.



So mag modify ko sa rules ani?

di na mao bro, wala sa iyang users guide? check daw bro

[Tahm Bhai]

di na mao bro, wala sa iyang users guide? check daw bro

Na check na nko ang users guide. Ang QoS part kay using the Bandwidth control lng. Pero dli ko sure if sakto ba na akoa gbuhat. Gsunod ra nko sa manual.

Mao ni link sa akoa gsundan. http://www.tp-link.com/resources/sof...9149225111.pdf