Question about CPU Temps

[ispaniardz]

---

boss werty, ang 55c na load temps bah, ok rba na? wla pko ng.oc... normal rna xa? kulang pman pud ug exhaust ako chassis pud... watchutink boss werty?

ok rana imo system bai 50 is like normal if u really want it to tone down then get a cooling system for ur proce or devise a better cooling for your chassis or why not both

[EarlZ]

medyo extreme na ni sya and will affect lifespan... ug makaya below 60 mas maayo, especially on an overclocked system...

True it may affect the life span, instead of 15-20years its gonna be down to 9-10yrs, Intel conservatively rates their processors on the consumer end, running these things over 80c will not break the processor, probably you've upgraded twice by that time


@Topic

Might I recommend we standardize the settings for prime95 since there are a lot of settings and tests which will massive affect the temps, I can either post a peak of ~80c or just use a different test to impress you guys with 50c.

If this is welcome then this is what I would recommend

Prime95 v 26.4 build1 OR higher
Under advanced, Enable round off checking
For the actual testing phase click on small FTT since it generates most of the heat and then dont start it yet, click custom size to lock the maximum ftt size down, the bigger the ftt the cooler the processor will run.

For intel users with compatible processors, only use RealTemp for AMD I dont really know what to recommend since I've been out of the loop for recommended temp reader for AMD.

Indicate the version and bit of your prime, i.e. prime32 or 64bit
and the version of the temp monitor, duration and ambient temp.


This is a quick 10mins run with Prime95 v26.4.1 64bit, using the smallFTT then custom settings as stated above, with a 31.5c ambient temp ( used a room thermometer ) seems to be a very hot evening today.

Anyway pictures say more than a thousand words


Uploaded with ImageShack.us

[play_chess23]

btaw sah? 40c rjud... hmp

ga ulam2x man sad dug to pag test nako ani so ang ambient temp. around that time ubos2x. unya ang ako proc kay 630 ra

ako unya ni buhaton usab kanang init kaayo ang panahon.

pero sa imo case bro... I think air flow na isa imo case kay ni mention ka na isa ra ka fan imo gamit. try sad to check sa contact sa imo HSF ug proc basin luag gamay. unya gamit ug nindo na thermal paste. sa ako mga nasulayan ganahan ko sa Tuniq TX3 na paste.

[dAmn_u]

mine is this


ImageShack® - Online Photo and Video Hosting

bale nagpalit ko bag-o nga cpu casing.. kanang gamay. mo init man ang kilid sa case.

nagproblema lng ko basin ang sa sulod grabe na kainit.

labi na ang video card nako. niabot 80celsius. pero ang

basta hikapon nko ang case init gyud. btw gipatong ra nako ang monitor sa cpu..

mga expert, paki examine daw ni sa aking result sa cpuid kung normal lang ni? mga 2 hrs na ni nag on nga pc

thanks

[Cabzjr20]

Ok pa au na nga temps bro.. no need to worry..!!