Camera Accessories

[prove]

---

I think an ordinary tripod could be an option...

Here's a Newbies... Design sa baratohon nga setup....




---- Removed STEPS ON HOW (Step by step detail is too much...)-----

CANNOT but MAY

Of course you cannot use the movable arm to point the cam down or up... But you can adjust the Height level of your tripod...

Since 6 months paman ko nagkat-on aning photography; Violent reactions and comments are welcome...

[saijo_18]

thank you sa tanan nag answer!!! Unsa man difference sa panel head and ball head?! hehehe

[dj-dark]

thank you sa tanan nag answer!!! Unsa man difference sa panel head and ball head?! hehehe

BALLHEAD looks like this...
http://www.flickr.com/photos/inthetrench…

For this particular model you unlock it using the lever on the right. This loosens the hold that the socket has on the ball so you can then move the platform in any number of directions.

The knob on the right allows you to adjust the amount of friction so you can better control the amount of movement when it's unlocked.

PANHEAD looks like this...
http://www.bogenimaging.us/webdav/site/m…

It allows you to easily 'pan' from left to right/right to left. This model has 3 knobs. The left one allows you to lock or tilt it on one axis (up/down). The middle one on the bottom of the head allows you to pan it left/right and the right one allows you to tilt it on a 3rd axis lower left/raise right side and vice versa.

What are the advantages of either? The Ball head is significantly easier to make quick adjustments because you only need to unlock it but because of this, it's also alot harder to make minute adjustments with a ball head.

The Panhead allows you to make adjustments to just one axis without affecting the other 2 axis. The disadvantage of this type of head is it's not as quick and easy to use as a ball head.

There are some that say that panheads are primarily for videography. While they certainly can benefit a videographer because you can allow it to only move in one axis (left /right, or up/down, etc.) those same qualities may be also beneficial to a photographer. It really depends on what you're shooting and the conditions you're shooting under.

articles from What's the difference between a ball head and pan head tripod? - Yahoo! Answers

[szichri]

BALLHEAD looks like this...
http://www.flickr.com/photos/inthetrench…

For this particular model you unlock it using the lever on the right. This loosens the hold that the socket has on the ball so you can then move the platform in any number of directions.

The knob on the right allows you to adjust the amount of friction so you can better control the amount of movement when it's unlocked.

PANHEAD looks like this...
http://www.bogenimaging.us/webdav/site/m…

It allows you to easily 'pan' from left to right/right to left. This model has 3 knobs. The left one allows you to lock or tilt it on one axis (up/down). The middle one on the bottom of the head allows you to pan it left/right and the right one allows you to tilt it on a 3rd axis lower left/raise right side and vice versa.

What are the advantages of either? The Ball head is significantly easier to make quick adjustments because you only need to unlock it but because of this, it's also alot harder to make minute adjustments with a ball head.

The Panhead allows you to make adjustments to just one axis without affecting the other 2 axis. The disadvantage of this type of head is it's not as quick and easy to use as a ball head.

There are some that say that panheads are primarily for videography. While they certainly can benefit a videographer because you can allow it to only move in one axis (left /right, or up/down, etc.) those same qualities may be also beneficial to a photographer. It really depends on what you're shooting and the conditions you're shooting under.

articles from What's the difference between a ball head and pan head tripod? - Yahoo! Answers

O.T.: nosebleed... hehehehe

[phatwell83]

Most of SLR tripods can do this... me i'm using a velbon cx-888... it can do both landscape & portrait. naa cya swivel to tilt UP and down, left to right, then naa cya swivel to tilt the cam from landscape to portrait. and many more... Best of all pesyong pang kaibigan... dili cya bug-at alsahon ug dili bug-at sa bulsa... hehehe if nahan kag pic on how it tilts form landscape to portrait, ingna ko kay mo take ko ug pics... hahahaha

[SayoteMambo]

Naay daghan sa CD-R King barato nga tripod kung walay budget para ballhead... =)

[saijo_18]

thank you jud kaayo sa tanan nag reply!!!

actually, para sa future reasons, pwde sad ni ma himo og information about other topic og camera accessories, i mean, kung gamay2x lang bitaw, like lens, filters, og bisan unsa pa...

last, ang regular ba na tripod pwde mabutangan og P&S?! hahaha, kay P&S raman gud ni ako-a but I need a tripod para ma tindog nako ang camera... plus kung naa me something like photoshot, dili me mag lisod if korog2x medyo ang kamot.

[alucard_x]

ang regular ba na tripod pwde mabutangan og P&S?! hahaha, kay P&S raman gud ni ako-a but I need a tripod para ma tindog nako ang camera... plus kung naa me something like photoshot, dili me mag lisod if korog2x medyo ang kamot.

Yes most regular tripod can fit a P&S.

[docy]

mga bossing! ok ranang tripod sa cdr king?

[saijo_18]

aside sa tripod, naa ko'y ask...
unsa na ng accessories,

for example :
naa'y photoshot, tapos before ka mo take sa camera, naa'y device nila ga e kuan sa aping sa model or something... i don't know unsa tawag, but curious kaau ko ana, hahaha, unsa na cya?! device na maka detect sa hotness?! i mean, ka init sa body or aura para e adjust ang flash?!

tana maka sabot mo sa ako-a explanation, hehehe...

tnx