Video Card or Motherboard Problem??

[kabz]

---

atot pareha man jud ta bord la jud blema ako ehhehehee

[isyot_daut]

lol....cge mangud ka of p*rn..haha dn-a kaduwa cod4 ai..haha

on and off ra imo monitor or ang cpu jud mag on and off?
if ang monitor lng try changing ur dvi cables...wagtang guro na...hehe

[kabz]

murag off ni tanan iyaha kay mo boot man jud og restart

[kabz]

CCC updated to version 9.4.

but still, ni balik iyang sakit ganiha... ako na pud gi tang2x ang DVI, then pila ka minutes, gi balhin sa pikas. then ni on siya balik.


tabaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaang!!!!

sir sure ka cccc 9.4 unsa ni ang bios kay kung bios 3.4 paman ang latest sa march

[and1rew]

himua ang gi-ingon ni kabz try to use the stock HSF of intel its easy to install

baka sa pag install lang yan ng HSF mo

nde naman cguro PSU ang prob kasi may power naman

[isaacrobot]

suwayi natog gamit ang stock hsf bai,,, basin nag katag nana ang thermal paste sa solod sa cpu. lagot ka.

wala ba nai onboard graphics imong motherboard bai? try onboard gamita if naa. sayanga sa e8500 oi. hmmmm oc beast raba na

and try lang sad balhin2 sa mga ram ,

[waterboy0911]

mo off lang kalit ang imo fan sa imo processor bro??

[personalmgt]

Wa pa gyud ni ma-ayo dem?

Try lang sa gyud nang suggestion ni isaac. Then burn-in for 1 week

[loloyis.com]

I had this problem also with the Gigabyte GA-X38-DQ6.
It turns out that my 2 x 2GB TWIN2X2048-6400C4DHX running @ DDR2-800 rated 2.1V
is not receiving enough voltage. Its only at 1.89V set automatically by my motherboard.
I used CPUID HW Monitor to check my voltages.

Check if your memory is running with its rated voltage.
If not, shut down your pc and remove one of the memory card.
Turn it on and enter your bios.
Set the right voltage for your memory in the bios, save and exit.
Let your PC boots and loads up your OS then shut it down.
Replace back the memory card you remove and turn on your PC.

This works for me maybe so does for you.

[rhodem24]

bago pa gyud na abot akng PC.. gipang tang-tang balik tanan components nya gi balik assemble...

okay pa man siya as of now... mayta'g okay na ni siya PIRMI.