Arctic Cooling Freezer 7 Pro
Heat Sink : 104 x 58 x 126.5 mm
Fan : 107 x 43.5 x 96 mm
Overall Dimensions : 107 x 96.5 x 126.5 mm
Rated Fan Speed : 900 - 2500 RPM (PWM)
Bearing : Ceramic Bearing
Power Consumption : 0.16 Amp.
Air Flow : 45 CFM / 77 m3/h
Weight : 520 g
Noise Level: 0.9 Sone
Thermal Resistance : 0.17°C/Watt
Remarks:
Push-pin mounting method but due to wear and tear, it might be harder to mount the cooler since the legs are spread apart already but with a little patience, it'll go through and the cooler is no longer shiny but not oxidized, of course. With box and manual but no more pre-applied thermal paste.
SOLD!!!
Thermalright HR-05/IFX**
Dimension:
L85.8 x W20(fin), W30(base)x H105 (mm), without fan
Weight: 110g (heatsink only)
**link contains compatible motherboards for the cooler.
Remarks:
In good condition, foam spacer is a bit worn out but still works to protect your chipset core, regardless. Fan clips are unused, cooler isn't shiny anymore but again, not oxidized. Item still has its box (80mm fan not included).
Price: 900
Interested buyers may PM, reply or text (0905-299-7323). I reserve the right to whom I sell the item. Negotiable but
BE REASONABLE. Items will be sold as is, without warranty.
RFS: No use since I'm on Xigmatek Dark Knight and the GA EP45 UD3R doesn't seem to need aftermarket cooling (I hope) and its using a heatpipe which makes it hard to remove + the risk of voiding the warranty. Items were previouly used on my DFI ICFX3200 T2R/G (RIP) who died because of a short circuit.
Something for your eyes: