Need help and guidance mga masters

[CRASHNBURN]

---

mga guru, bought my first car, 2nd hand cya 96 lancer auto, ngayu ta ko advice on moddings and what to look out for or concentrate para make sure nindut kundisyun sa unit.

please give me ur inputs, salamat daan mga masters.


unsaon pag panindut ani, exterior mods? pwede ni?

[kalawkaw23]

15's Rota nga mags, 195/55 nga ligid mga price ani kung second hand naa sa 15k,

Lowering spring... mga 10k

Alot of DIY , ambering, engine detail, tire black

Keep it simple bawia lang sa drop and nice mags daug na...

[cesski]

una man jud cguro na ang rims & tires..

lowering springs dayon nya amber corner lights

pwede pud HID.. options are unlimited! basta naa lang wawarts..

[jackson428]

daghan kau mabuhat ani na car.. here are a few suggestions

1. change rims to 15n's = 10-20k in your suking surplus rim shops (depende sa condition and porma)
2. lower the car a bit or as desired=10k+ ang brand new depende sa brand. 2nd hand are cheaper. you can also have it clipped if porma lng
3 amber the corner lights = DIY and yamaha orange spray paint and top coat which will cost around no more than 300 and some sweat. hehehe

as posted on the other thread

[CRASHNBURN]

ayay, nitukar na sugod ang ulcer sa akong bulsa, hehe, thank you mga master, naa muy recommended shops na expert sa modding? better unahon mags and tires nuh?

salamat mga boss, i hope makat un ta maayu ninyu. by the way please educate me sa mga term sa tires and rims para mkabaw sad ko, one stp at a time, unsa na "pcd" and where do i find it?

salamat daghan

[supermario]

daghan kau mabuhat ani na car.. here are a few suggestions

1. change rims to 15n's = 10-20k in your suking surplus rim shops (depende sa condition and porma)
2. lower the car a bit or as desired=10k+ ang brand new depende sa brand. 2nd hand are cheaper. you can also have it clipped if porma lng
3 amber the corner lights = DIY and yamaha orange spray paint and top coat which will cost around no more than 300 and some sweat. hehehe

as posted on the other thread

bro, wat are the pros and cons of using clips on the springs? daghan ba nagpa clip lang instead of using the expensive lowering springs jud? unsay say sa uban nimong nahibaw-an nga nagpaclip lang? Thank you.

[kalawkaw23]

scan sa mga mitsubishi clubs nga thread there you will learn a lot.. i learned from joining online club.. im affiliated with sentraclubph and clubnissansentra and even mynissancebu..diri gyud ko nakatun sa tanan...

[poy]

bro, wat are the pros and cons of using clips on the springs? daghan ba nagpa clip lang instead of using the expensive lowering springs jud? unsay say sa uban nimong nahibaw-an nga nagpaclip lang? Thank you.

As much as possible, refrain from clipping mga bossing (or putol).
I've tried clipping sauna and my brand new shocks didn't last 3 months.
Unless probably if you would risk with clipping and use gas shocks.
Pero gahi na sad kaayo imo suspension if you would do that.

I suggest you look for second hand nga lowering springs na lang para safe.
But then again, even lowering springs might damage your fluid-type shocks so mas maayo gihapon nga mo upgrade ko into gas shocks.

But comparing lowering springs and clipped springs, mas maayo gihapon ang lowering springs.

Opinion lang gihapon ni mga bros

[poy]

mas maayo jud nga mo join ka sa mitsu club diri para masugdan na dayon.........
ako sad puhon after maayo ako mitsu

[CRASHNBURN]

mas maayo jud nga mo join ka sa mitsu club diri para masugdan na dayon.........
ako sad puhon after maayo ako mitsu

master poy, la pa man na organize mitsu club, up na ba ni?