Default user pass for Globe Siemens Gigaset Se260

[Borgy]

---

i tried to use Admin admin which is according to manual no effect

tried Admin password no effect too


helpp plzzz

[rockford_fosgate09]

admin
password

[Borgy]

tried to reset it still nothing


according to 171 these new modem's settings cannot be change you cant change anything like turning off dhcp or turn it to bridge mode except ur globelines log in and password.

[jdimpas]

poke the hole to reset.

[Borgy]

poke the hole to reset.

hehe i tried that already within the first 5min the globe contractors left after installation


reset the modem at the back small hole


log in and pass ive tried so far


admin admin
Admin Admin
ADMIN ADMIN

admin password
Admin Password

Admin 1234
admin 1234

even my log in and account password

google Siemens Gigaset 260 for reference all turn up to some vietnamese website

woohaa could globe have lock it with some special firmware

i cant use these shit imhoo

i need a bride mode modem

[swordfish69]

try this: user user
it works for me

[Borgy]

try this: user user
it works for me

thks swordfish

bai ka sulod me finaly sa GUI sa modem , but cant do much i can only acess it's port forwarding function everything else is locked wtf globe firmware??.. btw it's default configuration from box/globe even from hard reset is the log in and pass entry with connect disconnect tabs so basically all you have to do to disconnect internet connectivity especially the naughty ones is to log in to common router ip 192.168.1.1 then off you go.


Do you happen to know how to log in as a power/admin user , i want to change it to bridge mode thks and also it's ip.

do globelines csr supports bridge mode?

[L1Technician]

Try username: admin
password: none (empty)

[Borgy]

Try username: admin
password: none (empty)

wa man

kanang user user ni swordfish ok but mura
limited ang functionality ni se260 na modem/router

you can only do much under ADvance tad

now i have to figure it out on how to connect router to router mode cause bridgemode is impossible. Care to help anyone hehehehe ?
now im going to have a bigger problem once i replace my dlink 604 with linksys rv042


modem ip 192.168.1.1 can't be change under status tab most of its features could only be viewed.
first thing you will see after log in 192.168.1.1 is the connect disconnect login acc and pass tab under homepage.

[SmaRkieS]

Wa dyud na ayo nga modem bay pa ilisi nalang na oi. Kato unta karaan nimo nga modem

The Gigaset will not Allow you to forward" enough "ports. You should try using the DMZ portion of this the router if it is available. Alternatively you can try The Switching the router to bridged mode. You will need to Contact your ISP to Switch to bridged mode, so they make the intervention be required changed on their end.

About sa vietnamese nga site e translate lang sa google or babel.