Intel DG33FB Mobo problema!

[nicholson_mb]

---

mga fellow istoryans!

dli na mu power on akung mobo. peru mag siga iya power led nga attached sa mobo. gi check na nku tanan possible cause peru dli ghapon mu on. gi check nku tanan wirings ug gi ilisdan na nku ug PSU, dli ghapon mu andar. knsay naay pareha ug problem ani? please help..

[DrE]

how about the 2032 battery?

[AMD_infinium05]

checked for any burnt components? check the components like capacitors, power regulators ( near the ATX power slot )

[nicholson_mb]

thanks for the replies. i checked already the 2023 bat. ok paman cya. 3v pa ghapon.
ang mga capacitors kay ok sad. limpyo kaau ang board. tabang please.

[eirawn]

1. Check the +12ATX connection
2. Remove the battery and reset the CMOS jumpers
3. Install only the processor and ram.

[yugi]

I suggest, REMOVE all hardware parts inside the casing for smooth troubleshooting. Then, place your mobo into solid table with cloth, then disassemble all hardware parts and clean all dusts if possible and after a while again easily assemble the hardware parts in order (processor, ram, videocard, hdd, psu etc..) and let see if its working even outside the casing.

Possible reason kay grounded. I believe dili mobo ang problema, check the PSU coz mo siga pana ang mobo lead maski guba ang PSU. ok update lang diri.

I hope it helps thanks.

[BroadBandAC]

gi check na nku tanan possible cause peru dli ghapon mu on.

unsa possible causes imo geingon?
Have you tried shorting the power switch pins onboard the mobo (imo i bypass ang power switch located sa casing)? have you tried testing the power switch ( check for continuity)?

knsay naay pareha ug problem ani?

Kasulay nako sa una, pero switch ra ang defective...



By d way, Ineg push nimo sa power switch wa ka makita na instant blink sa Power LED?

[BroadBandAC]

nicholson_mb....

gi check na nku tanan possible cause peru dli ghapon mu on.

unsa possible causes imo geingon?
Have you tried shorting the power switch pins onboard the mobo (imo i bypass ang power switch located sa casing)? have you tried testing the power switch ( check for continuity)?

knsay naay pareha ug problem ani?

Kasulay nako sa una, pero switch ra ang defective...



By d way, Ineg push nimo sa power switch wa ka makita na instant blink sa Power LED?

[nicholson_mb]

@ sir BroadBandAC

aku na gi removed ang board sa casing. ok ra man ang switch sa casing. wlay initial blink sa power led sa board. ang prob niya kay dli mu trigger ang power on niya. peru mag on iya pilot led sa board peru dli lang jud mu trigger ang on kun aku e short ang power switch sa board. sa powersupply naman, ok raman ang PSU. 2 na kabuok PSU akung gi suwayan. sayang kaau ni nga board oi. kalagot kay gasto nasad. unsa inyo ka suggest nga board? kanang pangmatagalan. para download. hehehe.. aku man gud to gi pa andar for two weeks. aku ra to e restart kun mu action na ug hinay. den one night aku gi papahulay. pag next morning. yatap na ang board.. hehehe..

thanks for the replies...