Port forward Ip camera

[krkchn]

---

Mga bro, patabang ko portforward sa ako Ip camera beh,
Ako setup:
modem/router provided by globelines
with netgear wireless working as bridge

Test nako ang port online, and ang status is open (finally after long figuring it out)
but dili gihapon nako maaccess ang camera online. eg.124.7.176.90:1024

Anyone?

[krkchn]

gicheck nako. dili gihapon cya makasulod sa camera page even if 192.168.1.1:1024 ako itype. Anyone?

[boyguapo]

unsa man na imong connection bro? static or dynamic? kay kong dynamic na bro.. duah ka portforward imong buhaton ana.. sa modem ug sa router...

[jdimpas]

bro. have you done configuring your IP Camera?. I suppose na web based interface ang
configuration sa IP camera, first configure your camera through access in your webbrowser
type the default ip address.. once your in configuration menu, set the camera ip address
to static.. ip,subnet,gateway..etc.. then configured the desire port you want to use..
save all settings.. then try to access the camera through browser sample: 192.168.x.x:8080
eventually, if all is running.. then configure your router.. port forward sa ip address sa camera and its port.. if you want to access in different WAN.. be sure that your ISP provides you static ip address or if your in dynamic ip address.. be way is to register to dyndns..