Prolink H9300>Wireless Router... not working

[DigiBoy]

---

Scenario: Everything was working fine. I just removed the plug of the Linksys and transfer it to another socket and now its no longer working...

Prolink H9300 -> PC : internet is OK
Prolink -> WRT54G -> PC : internet is now ok after changing the LAN IP

problem: i cannot access wirelessly...

anything i need to check aside sa enabling the wireless capability...murag enabled naman gud to...pero wala ghpon...tried power off the modem and router pero wala ghpon.

[estoyse]

bro dba ang h9300 ky modem + wireless router naman so nganong gitaoran pman nmo ug lain nga linksys router?

[rlcrl]

bro dba ang h9300 ky modem + wireless router naman so nganong gitaoran pman nmo ug lain nga linksys router?

good question?

[DigiBoy]

is it? but i dont see the antenna....doesn't it have one bro? ambot kay bag.o pako diri

H9300P...mao man naa sa sticker...basin H9200 guro ni?heheh

[ajol]

picture sa unit

para ma analyze nato

[bootbox]

i think modem router na supplied by globelines

heres what you need to do
1. disconnect the linksys wireless router
2. access the config page and turn off DHCP server
3. change the local IP segment. if your prolink is on 192.168.1.***, then make the linksys 192.168.10.1.
4. connect the linksys and prolink on their LAN ports. (both linksys and prolink... not the WAN port)
ie. linksys LAN1 to prolink LAN1
5. dont forget to put security on your wireless connection

[estoyse]

aw murag dli tuod na sya wireless bro... ky ang H9300G man guro ang wireless...

[DigiBoy]

@bootbox, kay ngano gani Lan-Lan gani ni cya?

currently...its worked after changing the ip of Linksys to 1927.168.2.x pero one of the pc connected to it wirelessly kay cge putol iya connection, sa internet connection na cya? sa globe? or sa config?

by default unsa gani na cya nga channel? 6 ba? should i change it to 11?

[DigiBoy]

@bootbox, kay ngano gani Lan-Lan gani ni cya?

currently...its worked after changing the ip of Linksys to 1927.168.2.x pero one of the pc connected to it wirelessly kay cge putol iya connection, sa internet connection na cya? sa globe? or sa config?

by default unsa gani na cya nga channel? 6 ba? should i change it to 11?

[bootbox]

@DigiBoy

bro isa lang na router gamita. ang prolink nalang
disable ang dhcp sa linksys

lan to lan lang para ad2 ra kuha mga pc ug IP sa prolink