edimax BR-6104K

[pepau]

---

mga mods syensya i knw naa mga topics na medyo similar pro la man gud nag answer sa ako mga questions...
neway, gitagaan ko ako auntie ug edimax BR-6104K na router... ni work ni sa iyaha, smartbro sad iya isp.. now my prob is pag sulay nko sa ako pc d cya mogana,(dko kaaccess inet) or bsin sayup ako gihimu. ako giaccess ang router nya naa cyay quick set up nya ako gisunod, nya ingon auntie na pppoe daw ang smartbro so mao to na option ako gipili, required imu username ug pword sa smartbro.. pro wa man connection.. plsss help

[ronna]

unsa man ang error bai? try ug right click sa wireless icon sa imong systray, den check sa status.
if moingon gani nga limited or no connectivity, sa imo ng credentials.
nag lan connection ka or derecho wireless? if ga lan ka den naka access ka sa router, den di gihapon ka connect, e-reset nalang ng router factory defaults. unya nalang pag wireless if ok na imong lan. wirless na nga router?

provide more info bai, gi unsa nimo pag connect, unsa ang error.. et cetera

[pepau]

dli man ni wireless... ala man error, ala jud internet.. sure ko dli ni sa smartbro kay ug ideretso nkos pc ang inet naa man connection.. but ug iagi sa router ala jud

mao ni ako gisunod... naa man sa manual

Chapter 1
Quick Setup
The Quick Setup section is designed to get you using the broadband router as quick as possible. In the Quick Setup you
are required to fill in only the information necessary to access the Internet. Once you click on the Quick Setup Wizard in
the HOME page, you should see the screen below.
Step 1) Time Zone
The Time Zone allows your router to base its time on the settings configured here, this will affect functions such as Log
entries and Firewall settings.
Click on NEXT to proceed to the next page (step 2) Broadband Type.
Step 2) Broadband Type
In this section you have to select one of four types of connections that you will be using to connect your broadband router’s
WAN port to your ISP (see screen below).
Note: Different ISP’s require different methods of connecting to the Internet, please check with your ISP as to the type of
connection it requires.
Cable Modem Your ISP will automatically give you an IP address
Fixed-IP xDSL Your ISP has given you an IP address already
PPPoE Your ISP requires you to use a Point-to-Point Protocol over Ethernet (PPPoE)
connection.
PPTP Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP) connection.

Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP should provide all the
information required in this section.
Parameter Description
User Name Enter the User Name provided by your ISP for the PPPoE connection
Password Enter the Password provided by your ISP for the PPPoE connection
Service Name This is optional. Enter the Service name should your ISP requires it, otherwise leave it
blank.
MTU This is optional. You can specify the maximum size of your transmission packet to the
Internet. Leave it as it is if you to not wish to set a maximum packet size.
Connection Type
If you select “Continuous”, the router will always connect to the ISP. If the WAN line
breaks down and links again, the router will auto-reconnect to the ISP.
If you select “Connect On Demand”, the router will auto-connect to the ISP when
someone want to use the Internet and keep connected until the WAN idle timeout. The
router will close the WAN connection if the time period that no one is using the Internet
exceeds the “Idle Time”.
If you select “Manual”, the router will connect to ISP only when you click “Connect”
manually from the Web user interface. The WAN connection will not disconnected due to
the idle timeout. If the WAN line breaks down and latter links again, the router will not
auto-connect to the ISP.
Idle Time
You can specify an idle time threshold (minutes) for the WAN port. This means if no
packets have been sent (no one using the Internet) during this specified period, the
router will automatically disconnect the connection with your ISP.
Note: This “idle timeout” function may not work due to abnormal activities of some
network application software, computer virus or hacker attacks from the Internet. For
example, some software sends network packets to the Internet in the background, even
when you are not using the Internet. So please turn off your computer when you are not
using it. This function also may not work with some ISP. So please make sure this
function can work properly when you use this function in the first time, especially your ISP
charge you by time used.
Click <OK> when you have finished the configuration above. Congratulations! You have completed the configuration for
the PPPoE connection. You can start using the router now, if you wish to use some of the advance features supported by
this router see chapter 2, 3, 4.

mao ni ako gisunod but ala my connection

[ronna]

taasa ani oi, nalipong ko eheheh e-add ko bai.. nhabz_84 ym ta

[pepau]

mga 8 pm rba ko maka online balik hope mag abot rata.. tnx

[ronna]

10.30 pm akogn sulod dodong. imo na gi restore factory defaulst and router? lan ra diay na..
phone jack><router><computer

or

phone jack><modem><router><computer \

asa ana? di na xa modem router? or router ra jud?

[pepau]

router ra.. smartbro>router>pc
>laptop but no connection

[cloud]

smartbro -> router wan port

port1 -> pc
port2 -> laptop

enable dhcp in router
router ip address should match/clone of pc ip address before router was connected.

router ip address 192.168.1.1
pc ip address automatic
laptop ip address automatic

dili kaayo ko ka visualize but i have the same router before. should be automatic. just be ready with login/password for smartbro just in case. pm me if you have more questions.

[nonoyantoine]

bro ana jud na ang edimax.. same here na prob.. try i on ang NAT... then put a host addres.. like 192.168.2.188.. butangi pud ug ip ang pc ug DNS.. nya ang laptop obtain lng suwayi lng..

[cloud]

i can help you set it up. pm me.