dual channel question

[bryan]

---

mga bradir, naa lang ko pangutana bahin sa dual channel.

For example naa ko mobo with 4 DDR2 memory slots, this mobo is capable of dual channel. kung naa ko naka-install karon nga 2Gig,

Slot1: 1gig Kingston DDR2 533
Slot2: empty
Slot3: 1gig kingston DDR2 533
Slot4: empty

unya mo upgrade ko og


Slot1: 1gig Kingston DDR2 533
Slot2: 512 crucial DDR2 667
Slot3: 1gig kingston DDR2 533
Slot4: 512 crucial DDR2 667

as you can see, lahi na og brand, clock and memory size
my question is pwede bani nga setup?

[mE_bytes]

your ddr2-667 would run at lower speed @ ddr2-533..

[vipvip68]

I think memory capacity is ok ra pero you need to run both sets of ram at the same clock speed. Its either ma overclock imong DDR2 533 to DDR2 667 pero most likely...ma underclock imong DDR2 667 to DDR2 533....

Some would also say that u might run into compatibility issues if you use different brands or memory sticks that arent matched pairs.

[bryan]

@Vip:

match man ang slot1 & Slot3, nya ang Slot 2 & slot 4. so? ok ba gihapon?

@bytes:

ok ba ni nga setup bahalag mo lower ang clock speed?

[dmelsie]

ok ra na mo function na yun lang ma useless ang 667 k 533 gyud na siya mas maau if pulihan nlng sad nimo 533 og 667 k sayang ang speed sa isa nya mas mahal pod or mas maau 533 nlng pod ka daan aw it depends nimo

[mE_bytes]

okie raman bro.. no issues with brands... m.lower ra jud lang imu ramspeed..

[mE_bytes]

dili man noticeable ang difference in terms of speed.. n_n,,

[bryan]

ahh.

ok ra sa akoa ang ma-lower ang speed. ang importante is it will work.

[bryan]

salamat sa infos bradir

[simoko]

amen...basta mo work ok lang...the only place where you see a noticeable change in performance with regards to your memory setup is in memory benchmarks.and also in overclocking...kung wala ka ga OC then payts ra kaayo basta naka dual channel mode lang imo setup...