Difference bet. 1 switch compared to 2 switches

[franzziss]

---

Gud day mga bro ug sis, ask lng unta ko kung naa ba difference kung mogamit ka ug 1 siwtch or 2 ka switch in 1 router. Ex., I have 20 units of pc then naa ko router. naa ba difference sa speed kung ilahi nko ang 10 units ug swith sa 1 lng ka swithch tanan? TIA

[cold_fusion]

Depende sa gamit. If you are only browsing internet through the router, the 2 switch solution is good enough. The bandwidth of 100Mbps is on 1 switch for 9 PCs link is more than enough.

But if you are using it to connect to a LAN server for file access or SQL transaction, better to have 1 big switch. This is because on a 2-switch system, all the PC on the 2nd switch connecting to the server in the 1st switch will use and share only 1 line, thus makes data transfer slow.

[franzziss]

ako gamit bro kay sa internet cafe man, kay ako plan lain switch for gaming and another 1 for browsing lang.. it matters bah?

[IT]

@franzziss .. diba you have 2 switches I think you better have this one ...


Network Optimizer for Gaming and VoIP Streamline your network.


The Network Optimizer for Gaming and VoIP from Linksys streamlines your home network for next-generation Internet applications. By applying various Quality of Service (QoS) techniques to your network traffic, the Network Optimizer makes sure time-sensitive applications like online gaming and VoIP calls run smoothly.

The Network Optimizer sits between your home router and broadband cable or DSL modem, and monitors the data going through. It automatically determines what data is time-sensitive and what isn't, and prioritizes delivery of that data to its destination, ensuring the best-possible performance for the various types of data that go through your network.

Traffic prioritization helps make sure that your online games don't lag when someone else on the network is surfing the web or sending email. Voice over IP phone calls sound cleaner. Outgoing streamed video from your Internet Video Camera runs smoother.

And the best part is that the Network Optimizer takes care of prioritizing the data automatically, with no user setup of QoS policies required. After a simple installation it gets right to work, enhancing your network's performance and helping you get the most out of your high-speed Internet connection.

Please click link below.

http://www.linksys.com/servlet/Satel...=2182086964B01

http://en.wikipedia.org/wiki/Quality_of_service

[gikapoy]

bai.. palit lang router nga naa QoS para ma control nimo ang BW or speed kada pc

[ajol]

Depende sa gamit. If you are only browsing internet through the router, the 2 switch solution is good enough. The bandwidth of 100Mbps is on 1 switch for 9 PCs link is more than enough.

But if you are using it to connect to a LAN server for file access or SQL transaction, better to have 1 big switch. This is because on a 2-switch system, all the PC on the 2nd switch connecting to the server in the 1st switch will use and share only 1 line, thus makes data transfer slow.

not if you use a gigabit uplink to connect the 2 switches

[cold_fusion]

ako gamit bro kay sa internet cafe man, kay ako plan lain switch for gaming and another 1 for browsing lang.. it matters bah?

Dili mo matter, a normal DSL can hardly reach 1Mbps while a single switch line can handle 100Mbps (1000Mbps on high-end ones), so you need 100 connections/computers on the separate switch to have a bandwidth bottleneck on the line.

[cold_fusion]

not if you use a gigabit uplink to connect the 2 switches

Even so, it is only 10x the bandwidth. 10 PCs can hog the network line from the 1st switch to the next. If running with high data throughput on the network and with multiple switches, the advisable configuration is to put multiple LAN cards on the server. One for each switch.

[ajol]

Even so, it is only 10x the bandwidth. 10 PCs can hog the network line from the 1st switch to the next. If running with high data throughput on the network and with multiple switches, the advisable configuration is to put multiple LAN cards on the server. One for each switch.

We are only talking of connecting the 2 switches....

THAT IS WHY SOME SWITCH have AN UPLINK PORT....

So that you can connect as many switch as you want....

1 Gb bandwidth between 2 switches is already big enough

[cold_fusion]

THAT IS WHY SOME SWITCH have AN UPLINK PORT....
1 Gb bandwidth between 2 switches is already big enough

Do the math. 1Gbps = 10 x 100Mbps. That is only 10 simultaneous connections passing to your single 1Gbps uplink line.
The uplink port is used to connect the switch to the server.