Fibre glass reinforced, 1 1/4" cut off wheels/disc for dremel/rotary tools 10pcs for 250php

[titaniumbox]

---

ADXL335 Module 3-axis Analog Output Accelerometer angular transducer

Description:
ADXL335 , 3-Axis ±3g iMEMS® Accelerometer Modules
Suggest voltage using 1.8 to 3.6v for adxl335b
3-axis sensing
Small, low profile package
Size : 4× 4× 1.45 mm
Low power : 350 μa (typical)
Single-supply operation: 1.8 v to 3.6 v
10,000 g shock survival
Excellent temperature stability
Bw adjustment with a single capacitor per axis
Rohs/weee lead-free compliant


Package Included:
1 x ADXL335 3-axis Analog Output Accelerometer Module angular transducer

Spoiler! 

[titaniumbox]

ESP-12E ESP8266 Serial Port WIFI Transceiver Wireless Module AP+STA

Description:
ESP8266 serial WIFI module
Type: ESP-12E
Everything ESP8266

Package Includes:
1 x ESP-12E ESP8266

Spoiler! 

[titaniumbox]

Mini Motor Drive Shield Expansion Board L293D Module For Arduino UNO MEGA2560 R3

Description:
New L293D motor shield, the input voltage DC4.5-25V 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repetitive)PER CHANNEL ENABLE FACILITY
OVER TEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V(HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES

The Device is a monolithic integrated high voltage,high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC and stepping motors) and switching power transistors .To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz.

Package Included:
1 x Mini Motor Drive Shield Expansion Board L293D Module For Arduino UNO MEGA2560 R3

Spoiler! 

[titaniumbox]

UNO R3 ESP8266 Serial WiFi Shield Extend Board Module With ESP-12E CC3000

Description:
10 support pwm / interrupt / serial / i2c scalable gpio

Arduino compatible configuration, call syntax!

The firmware update can be customized by Arduino expansion board

Without USB to TTL converter

A key to enter the brush write mode, without any wiring

Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini)
3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap.
It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance.
Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better.
You can quickly switch DIP switch ESP8266-12 industrial grade WiFi stable operation mode (such as operating mode and upgrade mode) module, integrated serial chip, quickly flashing the firmware.
Built-in 5V to 3.3V TTL level converter to prevent high-pressure Arduino TTL level of the WiFi module damage. (General module can not oh)
Onboard ESP8266-12 stable industrial grade WiFi module with a metal shield, immunity to interference.
Onboard ESP8266-12 standard pitch leads to a stable industrial grade WiFi module all interfaces, enabling developers to easily develop deep.
Site preparation ESP8266-12 provide industrial-grade stability WiFi module Arduino library, can be controlled by a very simple instruction, provide routine.
7 × 24 online QQ group, forums, e-mail technical guidance, sample programs, technical information sharing.
Use stackable design, it can continue to accumulate above the other modules, easy to use.
Onboard four LED displays the status of ESP8266, namely PWR, DFU, AP, STA, operation mode at a glance

Package Includes:
1 x UNO R3 ESP8266 Serial WiFi Shield Extend Board Module With ESP-12E CC3000

Spoiler! 

[titaniumbox]

SIMCOM SIM900D GSM/GPRS module

Datasheet:
http://avrproject.ru/sim900d/sim900d...are_design.pdf

Product Description:

Sim900D is a very powerful GSM module used for sms and call control. Using this module, one can easily control one’s robots and devices via sms or call.

Package Includes:
1 x SIM900D module

Spoiler! 

[titaniumbox]

GPS Shield GPS record expansion board GPS module with SD slot card With Antenna for Arduino UNO R3

Product Description:
Arduino GPS shield GPS record expansion board GPS Module with SD card slot
The expansion board is specifically designed for the Ard uino UNO and other GPS record expansion boards. Provides two kinds of GPS antenna interface. IO port pin with a plurality of analog interface leads, you can directly connect electronic building blocks for rapid prototyping. With an SD card slot, GPS information is recorded.

Features:
1. Use the active GPS antenna.
2. You can set the TxD and RxD jumper pins to connect to your need Ardino (D0-D8 optional), compared with a direct connection D0, D1 more scalable.
3. TF deck, SPI interface. Support Ard uino library.
4. With a reset button, you can directly reset the Arduino backplane.

Package Includes:
1 x GPS Shield with Antenna

Spoiler! 

[titaniumbox]

MAX6675 Module + K Type Thermocouple Thermocouple Sensor for Arduino

Description:
1. Working voltage: DC5V
2. Operating Current: 50mA
3. The temperature measuring range: -200°C - 1300 °C [Test procedure for 0-1023 °C]
4. The temperature measurement accuracy: ± 1.5 °C
5. The temperature resolution: 0.25 °C
6. The output mode: SPI digital signal
7. With a fixed mounting holes for easy fixed installation.
8. Storage temperature: -50 ~ 150 °C
9. The module weight: 4g
10. Module size: 25mm * 15mm * 13mm

Package Included:
MAX6675 Module + K Type Thermocouple Thermocouple Sensor

Spoiler! 

[titaniumbox]

XS3868 Bluetooth Stereo Audio Module OVC3860 Supports A2DP AVRCP

-XS3868 Bluetooth Stereo Audio Module
-OVC3860
-Supports A2DP AVRCP

Wireless Specifications:
Bluetooth: Version 2.0
Frequency: 2.402-2.480Ghz
Max Transmit Power: Class 2 4dBm (at antenna pad)
Receive Sensitivity: Better than -82dBm
Range: 10 meters
Data Rates: Up to 3Mbps (over the air)
UART Data Transfer Rate: 115200bps

Host Interface:
UART: No flow control support

Audio Interfaces:
Microphone: Mono microphone input with bias

Profiles:
A2DP V1.2-Sink Only
AVRCP V1.4-Controller Only
HSP V1.2
HFP V1.5

Supply Voltage:
Supply: DC 3.6V-4.2V

Power Consumption:
Current Consumption: Operational - less than 55mA (active), idle (sleep) < 10 mA

Connections:
External Antenna: Connection via SMT pad

Physical:
Dimensions: 15.7mm x 28.7mm x 2.3mm

Package Includes:
1 x XS3868 Bluetooth Stereo Audio Module OVC3860

Spoiler! 

[titaniumbox]

TB6612FNG Dual Motor-Driver 1A for Arduino Microcontroller Better than L298N

Features:
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.

Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).

Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.

Features:
Power supply voltage: VM=15V max, VCC=2.7-5.5V
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
CW/CCW/short brake/stop motor control modes
Built-in thermal shutdown circuit and low voltage detecting circuit
All pins of the TB6612FNG broken out to 0.1" spaced pins
Filtering capacitors on both supply lines

Dimensions: 0.8x0.8"

Documents:
http://www.sparkfun.com/datasheets/R...kout%20v10.pdf
http://www.sparkfun.com/datasheets/R...kout%20v11.zip
http://www.sparkfun.com/datasheets/R.../TB6612FNG.pdf
bildr » Controlling 2 motors with the TB6612FNG + Arduino

Package Includes:
1 x TB6612FNG Dual Motor-Driver

Spoiler! 

[titaniumbox]

FT232RL Module USB to Serial to TTL Converter power supply with USB


Description:
New design, use FT232RL chip with USB2.0,USB power supply with overcurrent protection, add 500MA self resettable fuse to protect your computer and device. Performance more stable.
Use FT232RL chip made by FTDI.
Leads all FT232RL chip signal port.
RXD/TXD transceiver communication indicator.
Power supply with USB, can set 3.3V/5V with jumper.
Board size: 45*30*15 mm

Package Includes:
1 x FT232RL Module

Spoiler!