setting up network

[Razamastazhe]

---

Mga ka istoryans, ask lang unta ko, I'm planning to add another PC, my question is, pde raba direct taud ang Ethernet cable sa LAN port #2 sa router ? or do I need to buy switch ? or kailangan pa mag configure ? salamat.

[dab_s_bad]

I say..., try it..., it won't blow/fry your equipment...

pde raba direct taud ang Ethernet cable sa LAN port #2 sa router ?

try..., if it works, then you don't need to buy a switch/hub

or do I need to buy switch ?

probably not (most likely you wont need a switch)..., since ingon man ka nga router imo gita-oran..., as long as the router is in (normal) "router" mode then dili 'bridge' mode...

kailangan pa mag configure ?

yes..., if wala mu work sa imo pag test sa pag-plug sa lan cable to pc and such..., then you need to configure it.


TS..., mura man ka nag-utingkay ug bomba ^_^, hadlok man mu-try.., joke lang

[techsuppunli]

fire in the hole.....................

[quantum]

TS go ahead....

[syanix]

Mga ka istoryans, ask lang unta ko, I'm planning to add another PC, my question is, pde raba direct taud ang Ethernet cable sa LAN port #2 sa router ? or do I need to buy switch ? or kailangan pa mag configure ? salamat.

Wala ni problema bisag hutdon pana nimo saksak tanan ports sa router. hahaha! pero kung puno na and you want to add more, maybe this time you may want to buy a hub or switch.

[muchacha00]

pwed rana TS.. go .. ipaslak nang angay ipaslak dha