AutoCAD 2008 Thread

[jinkazjinkaz]

---

good day sa inyo tanan...

nice pod ang revits noh, sa unsa na sya nga product? nakadungog ko ana nga software, puhon ngita ko ana software.

how about MCAD (Mechanical Desktop) its parametric also, no need to make 2d, or floor plan....
you only have to make a 3dmodel and then generate your plans, elevation, section, det, etc..
and if ever there are changes in your design, (since it is parametric) just revise your model and your plans. elev. etc will update the changes. You can also open your drawing to (Bentley) MicroStation V8.

Also AutoCAD dili na tingali nako pwede makalimtan kay 11years dako na kaayo ug part sa akong life
But i could say na dili kay sa autocad lang ko kutob i'm open to other CAD software...
Mao nangita ko ug Training (basic) sa Xsteel diri sa cebu, kung naa.

daghan man sad parametric software karon. As far as i know lang para sa AEC Industry (Architecture, Engineering and Construction), ang mga gamit nila kay ArchiCAD and Revit.

Dili kaayo nindot ang render sa Revit kay accurender based man siya. Dili pareho sa 3ds max nga makahimo gyud ka near realistic drawings depende sa skill. Naa sad plug-in ang Max nga Maxwell ang name nga mura na gyud picture.

But ang strength sa Revit kay ang database man niya. Ma-ihap niya tanan windows, doors, floor area, schedules sa maski unsa nga part sa imong building or house.

Imagine a 20-storey building unya maghimo ka ug door schedule or window schedule. Count it one by one in autoCAD?! Mabuang ko...


Sa Revit, once nabutang na nimo, kaila siya asa nimo gi-butang (unsa nga room), unsay size, unsay material nga gamit nimo, ang hardware nga imong gi-paris, ug pila-kabuok. Kung butangan nimo ug costing, pwede sad niya macalculate ang total.

Another reason why I still love Revit!

[swane]

jinkaz=Another reason why I still love Revit!

bro, u have the reason kay explored na nimo ang revit....keet it up.
hope modaghan pa ang atong kahibalo sa ani nga field...

i'm trying for another cad software, pero dili ko maka concentrate kay dili man kaau applicable sa ako job....

mao hinayhinay lang sad ko ug practice2x sa ubang software..

[jinkazjinkaz]

@swane: unsa ang imong field? mechanical?

[swane]

@swane: unsa ang imong field? mechanical?

structural & mechanical fields for oil & gas application. bro asa man ta maka kuha ug revit software?

[jinkazjinkaz]

infonet. Reseller na sila ug Autodesk Products.

Murag dili applicable ang revit nimo kay suited siya para building structures.

Naa siya Revit MEP (Mechanical, Electrical and Plumbing) pero pang building lang gihapon.
Unsa software gamit nimo? AutoCAD?

[swane]

infonet. Reseller na sila ug Autodesk Products.

Murag dili applicable ang revit nimo kay suited siya para building structures.

Naa siya Revit MEP (Mechanical, Electrical and Plumbing) pero pang building lang gihapon.
Unsa software gamit nimo? AutoCAD?

hmmm, diha sa Ramos?
AutoCAD, MicroStation, MechanicalDesktop ako mostly gamit na software, nangita lagi ko xsteel for structural kay maoy requirement sa client.
naa kay idea nag teach ug Xsteel sa cebu?

[jinkazjinkaz]

wala na sila sa Ramos. naa na sila sa capitol. kanang dona luisa bldg. naa bitaw Go Large graphic Printers. Usa raman tag-iya ana nila.

I don't know about x-steel bro. pero I think makita na nimo if kahibao ka mangita... hehe.

[swane]

wala na sila sa Ramos. naa na sila sa capitol. kanang dona luisa bldg. naa bitaw Go Large graphic Printers. Usa raman tag-iya ana nila.

I don't know about x-steel bro. pero I think makita na nimo if kahibao ka mangita... hehe.

ok, thanx...try lang ko pangita puhon kung may time ko...

[14343]

im starting this thread for a place to ask questions and give tips and tricks about AutoCAD 2008

let me start with my question

in 2008 when i use force snapping i press shift+right click then "E" for endpoint of a line, in the old version you could do this then without letting go of the shift key ,transfer to another snap like say "M" for midpoint.
in 2008 however i have to press shift+right click E for endpoint,then you have to let go and shift-right click again then M for midpoint

is there any setting i can configure to make it like the lower versions??

.......have you tried just pressing the tab key?......i use this than your method....this has been there since release 14

[jinkazjinkaz]

.......have you tried just pressing the tab key?......i use this than your method....this has been there since release 14

ug OSNAP turned on lang diay? diba muselect naman automatic ang snaps ug endpoint, midpoint, intersection, quadrant, etc.? depende na sa OSNAP settings nimo para dili naka magsige ug shift+ right click.