Get Your Schiit Stuff Here!(Best Prices) Authorised Distro

[dinkoy]

---

*all prices are "all in"

Schiit Audio Headphone Amplifiers and DACs.

1. Schiit Asgard 2 - 14,400

SINGLE ENDED CLASS A FET HEADPHONE AMPLIFIER
ZERO FEEDBACK | SINGLE VOLTAGE GAIN STAGE

Specifications
Headphone Impedance: 8-600 ohms
Gain: 5 (14db)
Frequency Response: 2Hz-200KHz, -3dB
Maximum Output: 20V P-P typ.
THD: Less than 0.1%, 20Hz-20KHz, at 1V
Topology: Fully discrete FET, Class-A single-ended, zero feedback, noninverting, single voltage gain stage
Power Consumption: 35W
Size: 9 x 6.75 x 2.25”
Weight: 5 lbs


2. Schiit Valhalla 2 - 19,100

SINGLE-ENDED TRIODE OTL HEADPHONE AMPLIFIER
ZERO FEEDBACK | NONINVERTING

Specifications
Headphone Impedance: 32-600 ohms
Gain: 8 (18 dB)
Frequency Response: 10Hz-200KHz, -3dB
Maximum Output: 30V P-P typ
THD: Less than 0.5%, 20Hz-20KHz, at 1V
Topology: Class-A single-ended triode, zero feedback, noninverting, single voltage gain stage Tube Complement: 6N1P dual triode input, 6N6P dual triode output, 1 each per channel
Power Consumption: 40W
Size: 9 x 6.75 x 3.25”
Weight: 7 lbs


3. Schiit Lyr 2 - 23,700

HYBRID HEADPHONE AMPLIFIER
DYNAMICALLY ADAPTIVE | ZERO FEEDBACK | NONINVERTING

Specifications
Headphone Impedance: 8-600 ohms
Gain: 10 (20 dB)
Frequency Response: 2Hz-200KHz, -3dB
Maximum Output: 40V P-P into 32 ohms typ
THD: Less than 0.1%, 20Hz-20KHz, at 1V
Topology: Dynamically Adaptive Dual-Mode Class A, zero feedback, noninverting, hybrid tube/MOSFET, single voltage gain stage, DC-coupled input and output
Tube Complement: ECC88 or 6BZ7 dual triode, 1 per channel (rollable to all 6922/6DJ8/ECC88/6BZ7 types and similar)
Power Consumption: 30W
Size: 9 x 6.75 x 3.25”
Weight: 7 lbs


4. Schiit Bifrost - 19,100

FULLY UPGRADABLE DAC | 24/192 BITPERFECT
USB 2.0 AND SPDIF | 32 BIT WITH DISCRETE ANALOG

Specifications

Inputs: Coaxial SPDIF, Optical SPDIF, USB (optional)
Input Capability: up to 24/192 for all inputs
Input Receiver, SPDIF: Crystal Semiconductor CS8416
Input Receiver, USB: C-Media CM6631

D/A Conversion IC: AKM4399
Analog Summing, Filtering: Fully Discrete, JFET differential topology

Output: Dual RCA (single-ended)
Output Impedance: 10 ohms

Frequency Response, Analog Summing Stage: 2Hz-100KHz, -1dB (actual frequency response limited by sample rate)
Maximum Output: 2.0VRMS
THD: Less than 0.008%, 20Hz-20KHz
S/N: Greater than 105dB

Power supply: 5 stages of regulation, including separate supplies for critical digital and analog sections.
Upgradability: Separate, modular USB Input Card and DAC/Analog Card are snap-in replaceable.

Power Consumption: 12W
Size: 9 x 6.75 x 2.25”
Weight: 5 lbs


5. Schiit Mjolnir - 37,700

BALANCED CROSSFETTM HEADPHONE AMPLIFIER
ZERO FEEDBACK | SINGLE VOLTAGE GAIN STAGE

Specifications


Headphone Impedance: 8-600 ohms

Gain: 8 (18db)

Frequency Response: 2Hz-400KHz, -3dB

Maximum Output: 45V P-P typ. Into 32 ohms, or 8W RMS into 32 ohms, 5W RMS into 50 ohms
THD: Less than 0.008%, 20Hz-20KHz, at 1V

Output impedance: less than 1.5 ohms
Topology: Fully discrete FET, cross-shunt push-pull Crossfet output stage, zero feedback, noninverting, single voltage gain stage

Inputs: one pair balanced XLR, one pair single-ended RCAs, choose one
Outputs: one 4-pin balanced female XLR, one pair dual 3-pin female XLR, and one pair male XLR preamp outs
Power Consumption: 45W

Size: 16 x 8.75 x 2.25”

Weight: 12 lbs


5. Schiit Gungnir - 37,700

Gungnir offers the world’s most advanced Adapticlock™ clock regeneration system in a fully upgradable, hardware-balanced DAC with 32-bit D/A converters, advanced fully discrete analog output stage, with hardware summing for single-ended output. Like Bifrost, it also offers one of the most advanced asynchronous USB 2.0 input sections available. The USB, SPDIF BNC and RCA coax inputs, and Toslink optical input all offer 24/192 capability.

Specifications

Inputs: Coaxial RCA SPDIF, BNC SPDIF, Optical SPDIF, USB (optional)

Input Capability: up to 24/192 for all inputs

Input Receiver, SPDIF: Crystal Semiconductor CS8416

Input Receiver, USB: C-Media CM6631
D/A Conversion IC: AKM4399
 x 2
Analog Stages: All fully discrete, JFET-input topology, DC coupled, summed for single-ended output
Output: One pair XLR balanced and two pairs RCA single-ended
Output Impedance: 75 ohms
Frequency Response, Analog Stage: 1Hz-100KHz, -1dB (actual frequency response limited by sample rate)

Maximum Output: 4.0V RMS 
(balanced), 2.0V RMS (single-ended)
THD: Less than 0.003%, 20Hz-20KHz

S/N: Greater than 108dB, referenced to 2VRMS
Power supply: two transformers (one digital, one analog) with 8 stages of regulation, including separate supplies for critical digital and analog sections.

Upgradability: Separate, modular USB Input Card and DAC/Analog Cards are snap-in replaceable.
Power Consumption: 20W

Size: 16 x 8.75” x 2.25”
Weight: 9 lbs


*PM for more options, specs and other adjustments
*contact 09324731671
*other models also available




Contact: 09324731671


Feedback here: TipidPC.com | dinkoy - Ratings

[AdunTuridas]

Makabaligya sad kag replacement tubes sa Valhalla? Salamat.

[dinkoy]

Makabaligya sad kag replacement tubes sa Valhalla? Salamat.

Yes, tubes and peripherals pwede ra.

[dinkoy]

UP...................

[dinkoy]

up.........................

[dinkoy]

Up.................

[dinkoy]

Up.................

[dinkoy]

Up.............

[dinkoy]

Up.............